grid matrix issue
 
Notifications
Clear all

grid matrix issue

11 Posts
4 Users
0 Reactions
7,908 Views
Posts: 7
 dirk
Topic starter
(@dirk)
Active Member
Joined: 8 years ago
[#50343]

I am new to this and when I attempt to create a pixel grid in display it appears that everything is working (i.e. patched to the controller). However, when I go to setup preview and configure the pixel grid it is white and when I click on any of the elements (i.e. grid R1 C3) nothing happens (i.e. no color change). When I look at the net properties under settings it shows light size 3, light spacing 8 linked elements (collection) and nothing under string name.

When I go to new time sequence editor and attempt to put anything in the grid time line nothing happens. Can someone tell me what I am doing wrong. Thanks


10 Replies
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago
dirk wrote:I am new to this and when I attempt to create a pixel grid in display it appears that everything is working (i.e. patched to the controller). However, when I go to setup preview and configure the pixel grid it is white and when I click on any of the elements (i.e. grid R1 C3) nothing happens (i.e. no color change). When I look at the net properties under settings it shows light size 3, light spacing 8 linked elements (collection) and nothing under string name.

When I go to new time sequence editor and attempt to put anything in the grid time line nothing happens. Can someone tell me what I am doing wrong. Thanks

what program are you using ah sounds like you are using vixen 3 did you set the color handling in the setup display page click the matrix and down at bottom left you should have a drop down box select color handling and set it to the bottom one rgb they mix


Reply
MartinMueller2003
Posts: 7615
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

It really sounds like you have not associated the element strings to the preview element. Can you show us the preview collection linking page?


Reply
Posts: 7
 dirk
Topic starter
(@dirk)
Active Member
Joined: 8 years ago
TazChaLet wrote:what program are you using ah sounds like you are using vixen 3 did you set the color handling in the setup display page click the matrix and down at bottom left you should have a drop down box select color handling and set it to the bottom one rgb they mix

I am using vixen 3.5u4. Yes I set the color handling to RGB. When I open the preview config page click on the grid and select the matrix icon. I draw the grid and everything is white (unlinked). When I select grid R1C1 and look down at the settings it shows the following
light size 3
light spacing 8
linked elements (collection)
string name empty

When I go to the linked elements and click on the collection it opens up the linked elements screen. In here under string to link it shows just string 1. I changed the light count for string from 1 to 48 and click set. Under the available elements it shows the 24 rows (Grid R xxx) and under linked elements it shows 48.


Reply
Posts: 7
 dirk
Topic starter
(@dirk)
Active Member
Joined: 8 years ago

I think this is what you are asking for

after changing light count
after opening link element tab

Reply
MartinMueller2003
Posts: 7615
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Yes and that screen tells me a few things about how you have the preview set up. First, it is set up as a "string of lights" not a string of pixels. Next you have not set the number of pixels in each row/column depending on how you defined the grid. You also did not move your strings from the left side of the screen to the right side. You will move one section from the left to the right for each row / column.


Reply
Posts: 7
 dirk
Topic starter
(@dirk)
Active Member
Joined: 8 years ago
MartinMueller2003 wrote:Yes and that screen tells me a few things about how you have the preview set up. First, it is set up as a "string of lights" not a string of pixels. Next you have not set the number of pixels in each row/column depending on how you defined the grid. You also did not move your strings from the left side of the screen to the right side. You will move one section from the left to the right for each row / column.

OK thanks, for the feedback.

How do I change it from string to pixel.

display setup
color config

. When I did the display setup I configured it as pixel. Then I click ok on the color config and also on the setup display. After closing out the setup display I open the preview config and click on the grid then the matrix Icon. I draw my grid and it is white.


Reply
Posts: 740
(@ezellner)
Prominent Member
Joined: 11 years ago

Within Preview Configuration, click on the matrix in the preview. It should bring up a properties section where you define the grid, i.e., the number of strings, the number of rows and light type. See pic below for an example (matrix is 128 pixels across with 32 rows).

Matrix properties

Reply
Posts: 7
 dirk
Topic starter
(@dirk)
Active Member
Joined: 8 years ago
ezellner wrote:Within Preview Configuration, click on the matrix in the preview. It should bring up a properties section where you define the grid, i.e., the number of strings, the number of rows and light type. See pic below for an example (matrix is 128 pixels across with 32 rows).

Ed,
This is what shows up after I click on grid then the matrix Icon.

configure matrix

When I right click on the dots I get this

config matrix element selected

Reply
Posts: 740
(@ezellner)
Prominent Member
Joined: 11 years ago

Looks like you selected net instead of matrix when you set things up initially. Try recreating your grid using matrix instead.


Reply
Page 1 / 2
Share: