Vixen/DMX error
 
Notifications
Clear all

Vixen/DMX error

4 Posts
2 Users
0 Reactions
2,163 Views
Daemon
Posts: 431
Topic starter
(@daemon)
Honorable Member
Joined: 18 years ago
[#28771]

Hi
I have a post here in the DMX section. Can a Vixen 3 guru have a look please and maybe make a suggestion or 2? 🙂

http://doityourselfchristmas.com/forums/showthread.php?30006-RPM-dongle-help-please&p=299265#post299265
Thanks
Steve


3 Replies
Macrosill
Posts: 9739
(@macrosill)
Member
Joined: 20 years ago

Steve,
Based on your other post you have resolved your issue. Is that the case or do you still need assistance with this?


Reply
Daemon
Posts: 431
Topic starter
(@daemon)
Honorable Member
Joined: 18 years ago
Macrosill wrote:Steve,
Based on your other post you have resolved your issue. Is that the case or do you still need assistance with this?

Have sorted the Vixen 3 issue now thanks Brian
Still trying to sort programming the dimming adapter but I thought I would post the issue anyway as it was unusual.
I will manage

Thanks
Steve


Reply
Daemon
Posts: 431
Topic starter
(@daemon)
Honorable Member
Joined: 18 years ago

Actually I could use one piece of advice.
I got the DMX start address set correctly now I believe. I was setting the dimmer to start address 49 because before it is a 48 channel board.
However when I open vixen 3 and go into the web server the light that I wired in on channel 1 of a 4 channel ssr turns on when I toggle channel 50.
As in I have "patched" channel 49 to a particular element and channel 50 to another but the light wired into sir channel 1 from the "A" port of my grinch comes on when I turn on 50 not 49.
Do I need to set the start address of my Grinch to 48 instead?


Reply
Share: