Well, I am using the latest vesion of vixen 3.03.01 (12/2). Played with sequencer and it worked great. Tested my show on Tuesday and things worked great.
I started the show last night and something strage happened. There appeared to be 2 versions of the same sequence playing at the same time with about a 5-10 second offset. (kinda like the row row your boat song). This was for both audio and light control. When the program would switch sequences, you can still hear the delayed version playing while the next sequence was starting. This continued through out the entire night. I even tried to close out of vixen and restarted the show but the issue came back.
I did check task manager and saw only a single version of Vixen listed under processes.
I have shut down the computer last night and will retry on a freshly booted computer tonight to see if it comes back.
Is there anything else I can look at?
Hmm.... that's...... strange! 🙂
Maybe check your scheduler: do you only have a single program set up to run? It almost sounds like there's 2x programs trying to run, and one takes a bit longer to load than the other, so starts playing afterwards.
(The architecture of v3 means that multiple sequences will play perfectly fine with each other, and the effects get combined...... sometimes that's a good thing, in this case it's probably not!)
Thanks for the help. It was pretty close to the problem.
When i tested several days ago, i setup a program in the scheduler to play just once. Then the next day, i setup a schedule for the same program at the same time to play through Christmas. What was happening was the program that was to play just the one day, keeps starting at the same time each following day even though it does not show on the scheduler.
I was able to repeat it today by leaving the scheduler blank, and the program started up right on time. No echo either. Although , the echo was pretty funny at times.
i had a similar problem last night i removed my old copies of v3 all but the current one im using and it solved it for me seems like when it starts. it calls all versions of v3 to run and since the older one isnt open yet it delays about 15 seconds until it opens and runs. i made sure to back up my sequences before hand and now have just one copy fingers crossed working glitch free for 2 hours straight tonight.
