After spending a day programming a sequence, its vanished.
I was try to add 2 more rows to a grid in the setup. But it was not playing ball. So I figured I would delete the Elements and recreate them, add the 2 extra grid rows. I used the exact same names, But now the Sequence has gone.
The .tim file has not change, so how does the .tim file link to the elements?
I am guessing its not by the name used in the element setup. But possibly using some complex GUID registry like coding?
Can some please explain how it hangs together please, so it can relink the Seq to the elements?
Many thanks
Ian
When you deleted the elements, you deleted what vixen needed for the effects you created on them.
You are correct, every object in Vixen is referenced by GUID, not name. You can't get the old GUID back after you delete an element. (Without painstaking manual intervention)
If your sequence saved while it was open and didn't show anything, then the sequencing is gone for good. The effects are not loaded into memory when it opens for elements that do not exist. So when it saves (even autosave) it will commit what you see as the sequence and the original effects will be overwritten and gone.
If you still have the original sequence that's not damaged, you can in theory save it. But that would be a manual search and replace operation for every GUID in the sequence.
--Jon Chuchla--
Sent from my iPhone using Tapatalk
So how does it hang together?
I have the .tim file and also all the files in "Module Data File" that appear to store the Nutcracker imports, picture / Movies etc.
I see a SystemConfig.xml and ModulesStore.xml
I am guessing its the SystemConfig.xml stores the GUID for the channel linking?
Not sure what the ModulesStore.xml is doing?
This rebuilding looks painful, even with a python script.
In an attempt to make this a simple as possible. Is there a way I can trick vixen in to redisplaying the Seq, so I can copy on to real active elements?
Like change every ModuleInstance / Type relating to channel linkage, in the .tim file to a couple of valid GUIDs in Module / System Config files?
Also, this raises some feature requests:-
1. Simple warning: A BIG in your face warning in the Setup "INTERFERING WITH OR DELETING ELEMENT WILL DESTROY ALL YOUR HARD WORK, ARE YOU SURE?" then.. "This can not be undone!, ARE YOU REALLY, REALLY SURE?"
2. Make the software more robust, Either save History, so it can be undone, or Orfan the Sequence in a way that it allow it to be copied on to new Elements?
I wouldn't adjust the profile but rather the sequence. The profile has a lot of things referencing the elements so there's a lot to change and it's all interlinked. And it's in multiple files.
In system config you'll see the elements listed with their name and GUID. You don't want the node section just the regular element section.
The problem is going to be figuring out which effect goes to which element. I honestly think you'll spend more time figuring it out than to just spend another day sequencing.
We wouldn't want to pepper the UI with warnings like that. You really only need to know that once and the rest of the time it just gets in the way. Also keep in mind that the display setup isn't aware of your sequences. So it has no way of knowing you have hours of hard work that's going to be lost.
We do have version control built into vixen. Did you have it enabled? It's there for exactly this reason. It's not enabled by default because it can use a lot of disk space and many people wouldn't know how to use it anyhow.
The sequence can't be opened without the elements it references. Where would it put the effects for unknown elements? If it just puts them on single temporary elements, will that effect actually look like what you originally intended? Probably not. It would be hard to recognize the intent of the effect so you can copy it where it belongs. For example a chase on a single element looks like a pulse. How would you recognize t as a chase so you can move it? It's just not really practical.
--Jon Chuchla--
Sent from my iPhone using Tapatalk
We wouldn't want to pepper the UI with warnings like that. You really only need to know that once and the rest of the time it just gets in the way. Also keep in mind that the display setup isn't aware of your sequences. So it has no way of knowing you have hours of hard work that's going to be lost.
It seem a few people have been caught be it. It only needs to come up once, with a box, "Got it.! Do not display again" The way Vixen links every thing by GUID, it should be aware of linked sequences. Software it what the programmer makes it. Its nice people put so much time into this for free, but still frustration when it stiffs you.
As for Version Control, Did not know that was there!. That would of saved the day. IMO, this should be on by default or offered at install. Disk space it cheap! Because, by the time you realize you need it, its to late.
Anyway it is Enabled now!.
Look at the file, I can not see why the sequence can not be displayed in the Seq, there appear sufficient information to preserve it, until it can be dragged onto new elements.
I am determined to get a Display up this year.
As you probable know, I started work on the ESP8266, back in Jan14, due to other commitments, I was not able to continue my efforts, but it seems progress on the ESP8266 has really come on.
Sporadic, looks like he has done a really nice job, Using the Arduino Framework is so much nicer. I was able to install the whole frame work and program a board in 30 Mins. Certainly beats trying to setup the Expressif tool chain. GCC etc.
I have left it a bit late, but i have 1000x 12mm Pixels and 1500x WS2812B(Silicone Tape) on order from China. Will they arrive on time? Who knows!!
