I wanted to see how everyone else laid out their different elements for sequencing their shows. I currently have mine broken out, but doing it this way seems like it might make sequencing more difficult.
Do you break each element down to its part so you can sequence each separately? (ex. Garage door as a whole element or LH side, top, RH side) If you set them up as whole elements, is there a best way to do wipes across the house from top to bottom, and side to side? I am using many more pixels this year and have been back and forth on the best way to do it, so I figured I would ask the professionals how they do it. Any suggestions are greatly appreciated. I am sure there is no "right" way to do it, but I wondered what, if any, advantages there might be in the different ways of setting up the elements for sequencing.
I will use my windows as an example. I have 4 windows of which one is actually matrix. I have a group called windows. under that there is a group for each wundow. in each window there is a top left bottom right and center element. each element is a sting of pixels. I hand crafted the pixel groups for the matrix window to create single lines to simulate the strings around the windows.
also under the top level windows group there is a top left bottom right and middle group. in each of these groups there is a corresponding copy of the group of elements for each window. this lets me control all of the window sides with a single effect or all of the windows together as a single effect etc.
same sort of things for my arches. i have an aeches group with a front yrd arches and eves arches groups. i can control all of the arches at once or as part of the front yar and house groups etc.
the point is that the same pixel can be a member of many groups, allowing you to apply effects at a macro level and create some cool effects,
Thanks for all the input. I believe I know how you have yours setup and it seems similar to the way I have mine setup currently. I have for example my garage as a main element then under that three different sub elements for the LH, Top, and RH side.
I do all kinds of nested groups. It gives me lots of options for sequencing differently as the song leads me.
I have a "rooflines" group with 3 sub groups for the 3 roof lines. (Upper, lower, garage) Then each roof line has a subgroup for each section (north, east, south)
Doing it this way I can apply an effect at any level and get appropriate effects. I can put something like a pulse or twinkle on the whole roofline group to get it all to act as one. Or I can work individual sections if I want.
--Jon Chuchla--
Sent from my iPhone using Tapatalk

