Pixel Grid Problems...
 
Notifications
Clear all

Pixel Grid Problems - Please Help!

7 Posts
5 Users
0 Reactions
4,360 Views
Posts: 6
Topic starter
(@programmerpatty)
Active Member
Joined: 10 years ago
[#46993]

Hello group!

I have the Boscoyo Stocking w/matrix and am using Vixen 3.4. When I set up the matrix which is horizontally placed (7 high, 20 across) and place text - it scrolls vertically and you can barely read it. I am wondering if I've pushed the pixels incorrectly. Here's a mock up of how I pushed them....the number represent the pixel 😉

20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41
61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
and so forth.

Can someone please help me?

Thanks so much,
PP


6 Replies
Posts: 740
(@ezellner)
Prominent Member
Joined: 11 years ago

Make sure that in both Display setup and Preview setup you have your strings going horizontally.


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

In vixen, the order of the elements is always bottom left to top right.
If it's set up horizontally, it's like this...

61 ... 80
41 ...60
21 ...40
1 ... 20

That doesn't mean that's how you need to push your pixels. But if you don't, you then need to do the translation when you're patching.

So since you did it top right, to bottom left, AND you zig zagged, you need to patch one row at a time.
First select the whole matrix group, then click the button below to show the patched controller channels.
Then hit the "unpatch controllers" button. Make sure to use the "unpatch controllers" button and NOT the "unpatch elements" This will unpatch all those controller channels.
Leave those controller channels selected.

Now select the first group, check "reverse elements" (not reverse outputs) and hit patch
Select the second group. do NOT check "reverse elements" and hit patch
3rd group, reverse and patch
4th group, no reverse and patch.
etc....

Now back in the sequencer, make sure your effects are set to horizontal string orientation, and you'll be all good.


Reply
Posts: 36
(@skykicker)
Eminent Member
Joined: 12 years ago

here is a code that prints test on matrix, would like to use it for multiple grids as serial read anyone have ideas


#include <Adafruit_GFX.h>
#include <Adafruit_NeoMatrix.h>
#include <Adafruit_NeoPixel.h>
 
#define PIN 12
 
// MATRIX DECLARATION:
// Parameter 1 = width of NeoPixel matrix
// Parameter 2 = height of matrix
// Parameter 3 = pin number (most are valid)
// Parameter 4 = matrix layout flags, add together as needed:
//   NEO_MATRIX_TOP, NEO_MATRIX_BOTTOM, NEO_MATRIX_LEFT, NEO_MATRIX_RIGHT:
//     Position of the FIRST LED in the matrix; pick two, e.g.
//     NEO_MATRIX_TOP + NEO_MATRIX_LEFT for the top-left corner.
//   NEO_MATRIX_ROWS, NEO_MATRIX_COLUMNS: LEDs are arranged in horizontal
//     rows or in vertical columns, respectively; pick one or the other.
//   NEO_MATRIX_PROGRESSIVE, NEO_MATRIX_ZIGZAG: all rows/columns proceed
//     in the same order, or alternate lines reverse direction; pick one.
//   See example below for these values in action.
// Parameter 5 = pixel type flags, add together as needed:
//   NEO_KHZ800  800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
//   NEO_KHZ400  400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
//   NEO_GRB     Pixels are wired for GRB bitstream (most NeoPixel products)
//   NEO_RGB     Pixels are wired for RGB bitstream (v1 FLORA pixels, not v2)
 
Adafruit_NeoMatrix matrix = Adafruit_NeoMatrix(32, 8, PIN,
  NEO_MATRIX_BOTTOM    + NEO_MATRIX_RIGHT +
  NEO_MATRIX_COLUMNS + NEO_MATRIX_ZIGZAG,
  NEO_GRB            + NEO_KHZ800);
 
const uint16_t colors[] = {
  matrix.Color(255, 0, 0), matrix.Color(0, 255, 0), matrix.Color(255, 255, 0),matrix.Color(0, 0, 255), matrix.Color(255, 0, 255), matrix.Color(0, 255, 255), matrix.Color(255, 255, 255)};
 
void setup() {
  matrix.begin();
  matrix.setTextWrap(false);
  matrix.setBrightness(5);
  matrix.setTextColor(colors[0]);
}
 
int x    = matrix.width();
int pass = 0;
 
void loop() {
  matrix.fillScreen(0);
  matrix.setCursor(x, 0);
  matrix.print(F("Test"));
 
  if(--x < -30)
{
    x = matrix.width();
 
    if(++pass >= 8) pass = 0;
    matrix.setTextColor(colors[pass]);
  }
  matrix.show();
  delay(30);
}

will post the one i have tried to implement with no success 👿 when i find it again


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago
skykicker wrote:here is a code that prints test on matrix, would like to use it for multiple grids as serial read anyone have ideas


#include <Adafruit_GFX.h>
#include <Adafruit_NeoMatrix.h>
#include <Adafruit_NeoPixel.h>
 
#define PIN 12
 
// MATRIX DECLARATION:
// Parameter 1 = width of NeoPixel matrix
// Parameter 2 = height of matrix
// Parameter 3 = pin number (most are valid)
// Parameter 4 = matrix layout flags, add together as needed:
//   NEO_MATRIX_TOP, NEO_MATRIX_BOTTOM, NEO_MATRIX_LEFT, NEO_MATRIX_RIGHT:
//     Position of the FIRST LED in the matrix; pick two, e.g.
//     NEO_MATRIX_TOP + NEO_MATRIX_LEFT for the top-left corner.
//   NEO_MATRIX_ROWS, NEO_MATRIX_COLUMNS: LEDs are arranged in horizontal
//     rows or in vertical columns, respectively; pick one or the other.
//   NEO_MATRIX_PROGRESSIVE, NEO_MATRIX_ZIGZAG: all rows/columns proceed
//     in the same order, or alternate lines reverse direction; pick one.
//   See example below for these values in action.
// Parameter 5 = pixel type flags, add together as needed:
//   NEO_KHZ800  800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
//   NEO_KHZ400  400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
//   NEO_GRB     Pixels are wired for GRB bitstream (most NeoPixel products)
//   NEO_RGB     Pixels are wired for RGB bitstream (v1 FLORA pixels, not v2)
 
Adafruit_NeoMatrix matrix = Adafruit_NeoMatrix(32, 8, PIN,
  NEO_MATRIX_BOTTOM    + NEO_MATRIX_RIGHT +
  NEO_MATRIX_COLUMNS + NEO_MATRIX_ZIGZAG,
  NEO_GRB            + NEO_KHZ800);
 
const uint16_t colors[] = {
  matrix.Color(255, 0, 0), matrix.Color(0, 255, 0), matrix.Color(255, 255, 0),matrix.Color(0, 0, 255), matrix.Color(255, 0, 255), matrix.Color(0, 255, 255), matrix.Color(255, 255, 255)};
 
void setup() {
  matrix.begin();
  matrix.setTextWrap(false);
  matrix.setBrightness(5);
  matrix.setTextColor(colors[0]);
}
 
int x    = matrix.width();
int pass = 0;
 
void loop() {
  matrix.fillScreen(0);
  matrix.setCursor(x, 0);
  matrix.print(F("Test"));
 
  if(--x < -30)
{
    x = matrix.width();
 
    if(++pass >= 8) pass = 0;
    matrix.setTextColor(colors[pass]);
  }
  matrix.show();
  delay(30);
}

will post the one i have tried to implement with no success 👿 when i find it again

You should start your own thread for help with this . 🙂


Reply
Page 1 / 2
Share: