Notifications
Clear all

Support for D-light

93 Posts
23 Users
0 Reactions
86.6 K Views
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago

It shouldn’t be too difficult to put Renard into a PIC18F2420 and plug it in to your D-Light board. Nobody looses, copyrights are still intact and your board then works with Vixen.


Reply
tconley
Posts: 410
(@tconley)
Honorable Member
Joined: 19 years ago

maybe even DMX then


Reply
Posts: 13
(@wseay)
Active Member
Joined: 19 years ago

I had originally considered Renard as an alternate protocol. But after doing some additional research, I would put my efforts behind DMX. This would open D-Light to a much wider audience. DJs, small theater, etc.

As to losing software sales, I would hope it would be made up by increased demand for finished controllers. Besides, some users are just more comfortable with commercial software. So I don't feel Spectrum demand will dry up.

Walter...


Reply
Posts: 1
(@nffy212)
New Member
Joined: 18 years ago
dman776 wrote:btw, the D-Light USB485 V2 Adapter works great as a DMX dongle. It is the same as the Enntec Open DMX (driver-wise).

So if that is true are the D-Light controllers using the DMX protocol to operate?


Reply
Posts: 14
(@dman776)
Active Member
Joined: 19 years ago

It's not true. We do not (yet) support the DMX protocol with our controllers.


Reply
Posts: 79
(@crazylightlady)
Estimable Member
Joined: 19 years ago

Did anyone manage to adapt the Renard protocol for D-Light boards? I know Darryl offered to publish the pin-outs over on the D-Light forum and would really prefer using Vixen for software. I do have my own pickit, so that's not an issue if someone can mod the hex file. Or tell me what I need to do to accomplish making my boards play nice together.


Reply
Posts: 19
(@rjmcnay)
Eminent Member
Joined: 18 years ago

I am very interested in a custom pic or firmware for our ACx16. Everyone here who writes sequences wants to use vixen! Is there anyway to know if this is going to happen this year? we have not yet purched aurora, and dont wish to if we dont have to. We're just worrying about the time, as there's not much of it left!


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

It's not likely to happen until you find someone with both the right skills and a d-light board to test with.


Reply
Posts: 737
(@joneslights)
Prominent Member
Joined: 19 years ago
crazylightlady wrote:Did anyone manage to adapt the Renard protocol for D-Light boards? I know Darryl offered to publish the pin-outs over on the D-Light forum and would really prefer using Vixen for software. I do have my own pickit, so that's not an issue if someone can mod the hex file. Or tell me what I need to do to accomplish making my boards play nice together.

Where are the pinouts, did he post them?


Reply
Posts: 19
(@rjmcnay)
Eminent Member
Joined: 18 years ago
P. Short wrote:It's not likely to happen until you find someone with both the right skills and a d-light board to test with.

Phil:

Can I ask: What do you mean by both the right skills?
I do have a d-light board and would be more then willing to test with it.


Reply
Page 4 / 10
Share: