Notifications
Clear all

RDS Plugin wanted

25 Posts
10 Users
0 Reactions
10.5 K Views
Posts: 16
(@richms)
Eminent Member
Joined: 18 years ago

It worked with the onboard HD audio once I set windows to 24 bit 192kHz for the rate everything uses. No need for an esoteric card at all.

Will write more about how I have done it in the past once this annoying part of the year is over and I have no more returned goods to sort out.


Reply
Aurbo99
Posts: 2804
Topic starter
(@aurbo99)
Famed Member
Joined: 19 years ago

Thanks Rich.

Which onboard audio do you have?


Reply
Posts: 16
(@richms)
Eminent Member
Joined: 18 years ago

Device manager just calls it Realtek High Definition Audio. - the motherboard on the machine I used was a gigabyte one with the AMD 780G chipset on it.

I seem to recall that I had some issues on the front jacks and had to use the rear ones and change it to stereo output rather than 5.1 which I normally run it on.

It was very very level sensitive to working properly. airomate lets you vary the RDS, the stereo and the main carriers seperatly so with a lot of messing around it was good stereo and reliable RDS without the main audio being overloaded.

The transmitter I used was a piece of crap with no PLL or anything so it was drifting all over the place. That may be an issue in the US since I believe the stereos go in 0.2 MHz steps, not the 0.05 MHz that they do here. I have been bidding on the cheap nasty looking 5w ones on ebay from china but keep getting out bid and now they have a start price on them that's more than I want to pay really. Should be easy to bypass the stereo encoder in them from looking at the pictures of inside them.

At the time I was trying the idea of sending on an existing station and sending AF info and then dropping the RDS signal - most radios it seems will pop onto the alternate frequency if you use a matching PTY. Was playing around after reading a story about pirates in the UK hijacking peoples radios and a mate and I were talking about how they would have been doing it.


Reply
Aurbo99
Posts: 2804
Topic starter
(@aurbo99)
Famed Member
Joined: 19 years ago

Good to know some of the HD audio chips may work for this.

Only one issue remains. Can you get the RDS data injected and still go through Vixen to matching it to the sequence before its sent off to the Transmitter.


Reply
Posts: 16
(@richms)
Eminent Member
Joined: 18 years ago

That is something I have not tried. There was no apparant way to get data into the one I was playing with, but at least its known that the hardware is all good to go with it.

I dont know if I will get anything together for a show 2010 at all. previously have just had static lights outside, but being down a long drive on a no exit street means the potential audiance is somewhat limited. I will have a play with RDS and stuff over winter when there is nothing else to do because it is raining 😉


Reply
Page 5 / 5
Share: