Notifications
Clear all

RDS Plugin wanted

25 Posts
10 Users
0 Reactions
10.5 K Views
Posts: 987
(@wirewrap)
Noble Member
Joined: 18 years ago

The most likely problem is the transmitter's audio passband won't allow the RDS info through. The FM stereo pilot subcarrier is 19 KHz. The left-right difference subcarrier is the second harmonic, at 38 KHz. RDS is sent on the third harmonic, or 57 KHz. Most audio paths only pass up to about 28 KHz. That's why the RDS signal has to be inserted right at the varactor. The RDS signal can't get through the normal audio path.

🙂


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

I'm sure that was the problem, WireWrap. They specified a few transmitters that it was compatible with and why and, of course, the Vastelec and other similar inexpensive units weren't on the list...

But if you're a DIYC guy, YA GOTTA TRY IT ANYWAY, RIGHT???? :mrgreen:


Reply
Posts: 16
(@richms)
Eminent Member
Joined: 18 years ago

I have used the other RDS and stereo encoder (airomate) sucessfully on a cheap nasty FM 6 in one headphone which I had messed with the inductor to push it up to about 88MHz (they default to 85 so that the provided crap-tastic headphones will start off on the transmission from the base)

Anyway, RDS and stereo were transmitted fine to my home stereo, and out to my car at about 20 meters once I had extended the antenna.

The thing is, most car radios do not display the radiotext in RDS because it is a driver distraction. A few broadcasters abuse the PS name to scroll text but that is really really annoying for a real station, but will probably be ok for your low power one since people wont be putting it in presets that keep getting renamed.

I tried it with another cheap mono ramsey transmitter and again, it worked ok but the RDS signal seemed to be a lot weaker on that one and I had to turn it up in the software to the point it meant turning the audio down to stop clipping to get the same range on the RDS, I ran out of gain on the transmitter to get the lower audio levels back up to where they should have been.

There is a piece of software called virtual audio cable that will make a fake sound card that will let you then loop that back into whatever processing you want to happen via another fake soundcard, so I had foobar 2000 playing into the virtual audio cable.

This was with my onboard HD audio and windows vista - no fancy card at all.


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
richms wrote:I have used the other RDS and stereo encoder (airomate) sucessfully on a cheap nasty FM 6 in one headphone which I had messed with the inductor to push it up to about 88MHz (they default to 85 so that the provided crap-tastic headphones will start off on the transmission from the base)

Anyway, RDS and stereo were transmitted fine to my home stereo, and out to my car at about 20 meters once I had extended the antenna.

The thing is, most car radios do not display the radiotext in RDS because it is a driver distraction. A few broadcasters abuse the PS name to scroll text but that is really really annoying for a real station, but will probably be ok for your low power one since people wont be putting it in presets that keep getting renamed.

I tried it with another cheap mono ramsey transmitter and again, it worked ok but the RDS signal seemed to be a lot weaker on that one and I had to turn it up in the software to the point it meant turning the audio down to stop clipping to get the same range on the RDS, I ran out of gain on the transmitter to get the lower audio levels back up to where they should have been.

There is a piece of software called virtual audio cable that will make a fake sound card that will let you then loop that back into whatever processing you want to happen via another fake soundcard, so I had foobar 2000 playing into the virtual audio cable.

This was with my onboard HD audio and windows vista - no fancy card at all.

Merry Christmas!

There might be many DIYC-ers interested in your setup, would you care to write up some sort of "how-to" and post it here?

One of the problems users typically run into is the final leg of the transmission process where the transmitter gets involved. Many of these have internal filtering which eliminates the possibility of injecting the signal via the audio input. That's why RDS has to be injected via solder connection elsewhere on the transmitter's board. If you can demonstrate the exact gear that you used and how you did it, it might open more doors for others.


Reply
Aurbo99
Posts: 2804
Topic starter
(@aurbo99)
Famed Member
Joined: 19 years ago

Researching Airomate you will find a list of sound card that will work with it.

http://www.diffusionsoftware.com/soundcards.php

It boils down to this;
Buy Airomate for 41.00 USD ON SALE! or 70.00 USD reg price.
The cheapest audio guaranteed to work will cost you 69.00USD

110.00 USD (Sale Price) or 139.00 USD and your running without the RDS hardware.

If you want to save the 29.00 USD and remove the miniRDS from your inventory spending 110.00 to 139.00 USD then its worth the money.

just my 2 cents, but nothing more.. I need all my cash for new lights..

*edit

To be fair, if someone has the software and is willing to test it on AC'97 chip sets as well as cheaper sound cards, perhaps we can stumble upon a card that can handle Airomate and turn it into an additional tool for us to use..


Reply
Page 4 / 5
Share: