Virtus wrote:I am no expert on RDS but does it seem possible that Vixen could feed the RDS data l directly into the audio out and not need external hardware at all?
This won't work because the audio input filters on the transmitter will limit the audio bandwidth well below the frequency that RDS operates at (57k).
RPM wrote:This won't work because the audio input filters on the transmitter will limit the audio bandwidth well below the frequency that RDS operates at (57k).
I figured there was a reason...there always is. Thanks
RPM wrote:This won't work because the audio input filters on the transmitter will limit the audio bandwidth well below the frequency that RDS operates at (57k).
Yah, that site specifies that the radio must take the input straight and not filter it. That's probably why I couldn't get it to work...
dirknerkle wrote:Since RDS is essentially running on a sub-carrier, the idea of feeding the RDS signal into the audio input occurred to me as a viable idea. There's a "StereoTool" software solution that is "supposed" to do that, albeit with only a few FM transmitters. I downloaded and fiddled with it but wasn't able to get it to work with any of my transmitters. I may not have set it up properly, and I was using the "trial" version, but it might be worth a look for anyone who has more time available than I currently do... Here's the link:The idea of an RDS plugin is pretty cool. I was hoping to avoid the hassle of purchasing the pira stuff and messing around with soldering it to just the right spot on those tiny surface-mount components, so I was hoping this all-software gizmo would work... 😐
Reading up on this StereoTool program it injects data into the Audio stream in the same manner as an RDS Encoder, to do this, the Soundcard you use must be capable of 192K sampling.
AS WELL, you MUST use StereoTool as your Audio Player to get it to work.
I don't believe Vixen allows you to use anything but it built in Player at this time.
Aurbo99 wrote:Reading up on this StereoTool program it injects data into the Audio stream in the same manner as an RDS Encoder, to do this, the Soundcard you use must be capable of 192K sampling.AS WELL, you MUST use StereoTool as your Audio Player to get it to work.
I don't believe Vixen allows you to use anything but it built in Player at this time.
Hey, Steve!
Merry Christmas...
I think that's right about Vixen -- it could be pretty stingy there. I was hoping to maybe run the StereoTool in another processor space... I never could get the thing to work with my various FM transmitters though. My sound card qualified using the software's internal testing, but I either never hit on the right combination of settings for my FM transmitters OR none of my transmitters were compatible with the StereoTool. It's more likely the latter...
That would have been a very cool solution!!!
-dave
