I'm having trouble with the remote client add-in.
I think I have it all set up right cause it mostly works. I can turn indiviual channels on and off and such. But what I really want to do is execute sequences and I'm having a problem there. Here is what I do and the order I do them...
First I load the serverUI application and I start the server.
Next I load Vixen and i go to the remote client area and click Contact
then I check the allow remote network connections (internet) checkbox.
Next I execute some html comands. First I send...
http://192.168.1.4:41402/vixen/command.html?action=retrieve&scope=local&filename=OneSecond.vix
Next I use the following url to execute the loaded sequence...
http://192.168.1.4:41402/vixen/command.html?action=execute
Then I get the error.
Renard Dimmer (modified):
(Router-Startup)
Access to the port 'COM4' is denied.
Some things to note...
Once I click OK on the error, the sequence will execute.
I'm using vista.
I have tried to run as administrator but this just causes the error "UNknown Client vixen" when I try to run html commands.
Can anyone help me solve this problem?
Hi,
Im having the exact same problem did you ever find a fix?
Many thanks,
Dean
How does that sequence behave if you run it standalone on the remote PC? I suspect it will give the same error which would suggest reviewing the attached plugins/configurations to me.
Hi,
Thanks for your reply. The sequence loads and plays fine on the remote PC if I do it manually. If I press OK to the error message, it also plays fine. Im using an Icicle board and a Simple Parallel 8CH board.
Thanks!
Dean
Oops, wrong thread.
I have received "UNknown Client vixen" several times. It means that it is at least connecting to your server but not to the sub-directory called "vixen".
Usually, if I restart the server and re-authenticate then that clears up this error.
Hope that helps
