Notifications
Clear all

Comm Question

4 Posts
4 Users
0 Reactions
1,598 Views
Posts: 1065
Topic starter
(@olingerjccj)
Noble Member
Joined: 17 years ago
[#8317]

I feel silly, Going through my 1st song. I will have 24 channels. The video goes over 32 chs, I cannot seem to get chs 13-24 on com 2 Am I doing something wrong or can i use chs 1-24 just on com 1.

Thank you
John


3 Replies
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago

You can use up to 286 channels on one Com port @ 50ms timing.


Reply
rlilly
Posts: 993
(@rlilly)
Noble Member
Joined: 19 years ago
wayne j wrote:you can use up to 286 channels on one com port @ 50ms timing.

@ 57600 baud.


Reply
rokkett
Posts: 441
(@rokkett)
Reputable Member
Joined: 17 years ago

John,

I hope you already have the answer - but just in case. I think you are saying you will have 24 channels - possibly a REN SS24, if I read your other posts correctly. You will have all 24 channels controlled from one serial port, and in Vixen, one instance of the renard dimmer output display plugin configured for ports 1-24. So you only will need to use COM1.

If you daisy chain another controller off of the first - say another SS24 - then you would have 48 channels controlled by one serial port and one instance of the renard dimmer output display plugin configured for channels 1-48. Again, only on COM1.

The only reason you need to use multiple serial ports off of the PC is if you ran multiple controllers directly from the PC. In this case - say the same two SS24s - I would have channels 1-24 on one serial port configured with an instance renard dimmer output display plugin with COM1 and channels 25-48 configured on a second instance of the renard dimmer output display plugin using COM2. Both SS24s would then have a dedicated serial line run to them from the PC.


Reply
Share: