That would be one of the stipulations. It would not be setup to sequence rapidly as the X-10 protocol has a latency issue.
I am also interested in the X10 plug-in. In past years, I've sequenced my lights using X10, but for next year I'm wanting to expand and sync to music, so I think the DIY controllers described on this web site would be more versatile, driven by Vixen.
Some questions about mixing X10 with other controllers described on this web site, all driven with Vixen:
- Can the older serial X10 controller (CP290) be used okay with the parallel-port on/off controllers such as Grinch or 595 Olsen?
- Can the Firecracker controller be used okay with other serial controllers (ie, Renard) as well as parallel-port (Grinch or Olsen)?
I'd like to continue to use my X10 modules for dimming, rather than buy a new dimmer controller, since they are working okay and I have a bunch of them. I'll probably phase out X10 as modules go bad, and replace them with a Renard or equivalent.
BTW, if someone gets the X10 plug-in working for simple on/off control, I might be able to help get it working for dimming (since I am a software guy).
thanks
don
I was wondering if anyone ever came up with a plugin for X-10 modules? I have a ton of x-10 gear and wanted to do a simple display this year. Since I'm new to this I want to go with something simple and affordable this year, but next year...Blinky-Flashy!
If your x10 application can operate from a command line using input parameters ( like "C:\x10app\x10app.exe /a1 /a3 /a5 /a7 ON") you could use the LAUNCHER plugin to accomplish this goal.
Does Launcher send it's output signals through the serial port? I'm using a Firecracker control module that plugs into the serial port. I looked at launcher and believe I could do what you suggested if it will communicate with my Firecracker. I also have a CM11a, if your familiar with x-10 stuff, if you think this would work better. A ready to go plugin would have made this project go faster though, since we have less than a month til Christmas.
Thanks for your time,
Vic
LAUNCHER operates as Vixen plugin on the show PC. You would need to install your x10 application on the same PC and connect it as required to your x10 devices. LAUNCHER allows you to open another application and set the command line parameters from within a Vixen sequence.
Ok, I'm changing my thinking on this process,
I have 8 x-10 modules hooked up to 8 lights. Could I not simply open up my x-10 remote and wire the parallel port cable wires into it to trigger the remote buttons which would turn on the modules. Maybe i need to use triacs, no big deal to wire them in to the circuit or use 5v relays (i have 8 on the shelf)
Which leads to 2 questions:
1. What plugin would I use? (12 chanel parallel?)
2. I would need to figure out which printer cable wires (pins) turns on and off for each chanel. Ugh!
I should mention that this is for lights I have in my Gameroom. I want to be able to do a light show to the beat of the music (slow beat of course because of the 2 second x-10 lag), but I don't want to eliminate my x-10 set up, because when we are dancing to the jukebox we may simply want to turn on the disco ball or laser lights or Led strips in a static sense.
I do hope you can help me...
