Waveform Error
 
Notifications
Clear all

Waveform Error

15 Posts
5 Users
0 Reactions
7,339 Views
Posts: 859
(@smartalec)
Prominent Member
Joined: 17 years ago
RMullins wrote:I should also point out that I have had the same copy of software run without any issues on 6 different XP machines. The only machine I have had the issue with is running windows 2000.

I do know the windows 2000 platform was built on windows NT, it was designed for server operation.

One fault i remember with win2000 is that if you did'nt have the modem turned on when the machine booted up (you had no modem),
it would'nt re-check the com port once win2000 was running.

are you driving any boards? or are you just starting a blank sequence without any output devices?

win2000 is like vista, it did'nt last long for a reason. cause it's got hidden flaws.

(but being a old computer tech myself, im interested if we can work it out an fix it) {im a sucker for problems}
alec


Reply
Posts: 28
(@rmullins)
Eminent Member
Joined: 17 years ago

I'm not driving anything when I get the error but when I do use the output I'm using the USB port with the DMX-512 output pluggin. It has been working fine.


Reply
Posts: 2216
(@ctmal)
Famed Member
Joined: 19 years ago

I'm just guessing here again...if you search your entire hard drive, is there another fmod.dll somewhere?


Reply
Posts: 28
(@rmullins)
Eminent Member
Joined: 17 years ago

That would make sense but the only copy is in the Vixen main directory.

The Analog Frequency Spectrum seems to work but I get the same error if I try to run Frequency Spectrum. Very strange. Is it possible there is some other resource not on the machine that is standard with XP?

Any other idea's?


Reply
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago

I just checked a Windows 2000 Pro (5.0.2195 Service Pack 4 Build 2195 according to System Information) and Vixen 2.1.1.0 & 2.1.4.0 worked without issue. This was a system that never had Framework installed. I installed only Framework 2.0.50727 and Waveform worked just as it should. If you install Framework 3.0 or 3.5, you will also get 2.0.50727 because it gets called by the newer version. I’ve included a Framework version checker that will list all of the versions installed on your computer.

An Fmod.dll error can be caused by various reasons including an error in the registry. The registry gets written to by a lot of programs and it’s not uncommon that errors occur when multiple programs are writing to at the same time. Here is a link that lists out several ways to correct Fmod errors.

http://pcsupport.about.com/od/findbyerrormessage/a/fmod-dll-not-found-missing-error.htm


Reply
Page 2 / 2
Share: