I am running Vixen 2.1.4.0, by choice, with a 4 port USB hub into which I have two outputs using USB to RS485 Dongles to drive two sets of Ren 64's, one with 1 - 448 Channels, the other 449 - 800 channels at 115200 baud. On the third port is another USB to RS485 dongle feeding the Ledtrix from the LTC utility.
I am running Win XP Pro and keep getting the dreaded "An output has caused the following exception, Value cannot be null, Execution stopped!", following which the program continues with the "Exception" boxes filling the screen, and windows error chime sounding out when the box appears. Any thoughts anybody, as I am stumped ?????
Another error that has appeared has been "Port Close object referance not set to an instance of an object - whatever that means!!
I have previously run USB to RS232 dongles with RS232 to RS485 converters to do the job and had no problems at all, so My only thought is wether the USB - RS485 Dongles are creating the problem, but "How"!!
???? Thoughts Gentlemen 🙂
Terry
I cant help with most of this issue. However, the following error comes up when a program tries to close a port after the OS has already closed it. This may be a victim of your other issue.
"Another error that has appeared has been "Port Close object referance not set to an instance of an object - whatever that means!!"
Martin
MartinMueller2003 wrote:"Another error that has appeared has been "Port Close object referance not set to an instance of an object - whatever that means!!"
I believe that's when you try to close a port that is no longer defined. The object takes memory space that you reference in the program, so there's nothing to close.
ErnieHorning wrote:Any chance you're running a background script?
Thanks for the thought Ernie, No I am not running a background script, so that one is not applicable 🙂
Terry
Sorry to revive an old thread of mine 🙁
I re-tried the setup that gave me strife during last years show to try and figure out what happened and discovered the same error keeps appearing.
To detail a little bit more of the setup:- The problem appears when running a 2.6 Gig, single core, Celeron Compaq 2500 laptop, with 960 Megs of ram, running Windows XP Pro. I have a multi port, outboard, powered USB Hub, into which I have three Prolific USB to RS485 dongles connected to give me the required outputs to my system, two for the Renards, and one to my Ledtrix running LTC. As far as I can determine the powersaving features are disabled, well, as far as I can see, there is no method of doing anything about it!! For the record I also tried some USB - RS232 dongles with the same results.
The error that appears on the screen randomly, at the start of a sequence under timer control, is the same as before, namely :- "Router", " An output plugin caused the following exception", "Value cannot be Null", "Execution has stopped".
If I cancel/accept the error by clicking the "OK" button the following error appears :- "Renard Dimmer", "Router Setup" "Access to Comport 'XX' is denied", usually the first Com port to the first Renard chain, as they seem to be allocated in sequential order.
The interesting thing is, if I leave the setup running under timer control as in during a show, the error box's with the first message in them keep on building across the screen like a cards on the table during a game, as well as building up on the task bar, but the data still appears to be going out to the Renards because the activity/data lights on the dongles are still active, and happily flashing away. I was unable to confirm this previously as I wasn't using the same dongles with activity lights.
If I cancel each individual error box the second message, appears and all sorts of "funny" things happen, like two lots of audio start running at the same time, and the timer no longer under control, which needs re-starting!
Another strange thing, when running under timer control, the error box doesn't appear at the start of every sequence, initially several sequences may run through then, one error pops up, the next might run fine, but the next may bring one up, etc, etc, they appear to be totally random!! As to how long the actual timer will run under these conditions I don't know, but at some stage the whole setup freezes, and nothing happens!!
Hopefully I will not need to use this "No 3 backup" setup this year as I now have a spare second Mini Tower machine available to run the show using a 4 port RS232 PCI interface card, which appears to work fine under test conitions!!
Any thoughts will be happily accepted, as I see that I am not the only one to "see" this error box 🙂
Terry
Have you seen this old thread, may be of help
prof wrote: http://doityourselfchristmas.com/forums/showthread.php?23453-Access-To-Port-Denied-Error&highlight=PORT+ACCESSHave you seen this old thread, may be of help
Good thought, many thanks but I think I have already covered all of those bases 🙁
Terry
