our show opened last wednesday and i am having issues with ports. we are running two shows with Vixen and Renards. we bought some small computers called nettop boxes (asus eee). i tested and tested and tested. they do not always come up with the same port assigned. this is a huge issue for me as the shows are across town and i cant bee there everynight to adjust teh ports in the sequences.
we just have the nettop box without monitor, no mouse, no keyboard. just a USB to expolorer board for an XBee chip as we are wireless.
is there a way to assign a port nummber to a physical port? what am i doing wrong? how can i get around it?
I know there are ways to use a batch file to set hardware configs. I have used batch files with "netsh" to set ip adress and subnet mask for custome software used to communicate over eithernet but I am unfamiliar with com-port settings. Maybee do a google search for the right commands then make a batch file and add to the startup folder
Does this happen with any USB device, such as a small USB hub? If a port-powered USB hub were put in between, perhaps it might come up more consistenly. I'm just shooting in the dark on this one -- I have no experience with the nettops, but my experience with the Explorer board is that once the board had been recognized, its internal address gets registered and it always comes back with the same port. However, I've never tried it as part of a boot-up sequence...
Here's a bizarre and out-of-the-box idea that's pretty dangerous to try becuase it can trash the Windows registry, but I was thinking that you might be able to find the addressing information in the registry, export that section as a REG file, and then in the Windows startup, run a batch file that reinstalls that REG file, which would change Windows' addressing settings back to what they were originally. Whether this will work or not is only theoretical at this point on that computer, but I've used REG files in other situations to restore various settings on a PC without a problem. The trick is in locating the right sections in the registry itself that apply.
Another out-of-the-box idea... perhaps system restore might work? Not sure how you would initialize it to always restore to the right set of restore data, but sometimes once you're out-of-the-box, it's hard to get back in...
