JHinkle wrote:Thanks for all the replies.I was asking so when I started my first song sequence and possibly decided to change timing after hours of work - was it possible.
I take from the replies - yes - with rework required.
I used the word command (for lack of a better choice) because the values are the result of a command --- as in chase - results in many values. I suspect Vixen internally saves what I call commands and thereby produces values when required.
When increasing timings - say from 25 to 50 - then you may have overlapping commands that want to generate a value for the same cell (since the number of cells were reduced by half).
I was asking what the outcome was to be -- as some has stated - rework.
Moral of my story/question - select properly at start grasshopper.
Joe
Thanks.
I forgot, but there's a utility/plugin to help select the correct timing. I believe it was "Tap Tempo" Been a while, but search for it.
Also, I'm not sure their would be all that much tweaking. I see very little difference when I swith Holdman's Sequences from 25ms to my standard 50ms. I'm sure he could tell, but there are very few people who could see the difference.
Below are two timing shots of audio towards the end of Music Box Dancer - I think it sounds like a synthesized string instrument being played.
One is showing 25 msec time slices to align a lighting sequence with - the other 50 msec.
The 25 allows you a better chance to hit the onset of the note more precisely - but if it takes twice as long to sequence and you can't see the difference - I'll go with 50.
25 msec:
50 msec:
Joe
JHinkle wrote:Below are two timing shots of audio towards the end of Music Box Dancer - I think it sounds like a synthesized string instrument being played.One is showing 25 msec time slices to align a lighting sequence with - the other 50 msec.
The 25 allows you a better chance to hit the onset of the note more precisely - but if it takes twice as long to sequence and you can't see the difference - I'll go with 50.
25 msec:
50 msec:
Joe
There's no reason it should take twice as long to sequence at 25 vs 50mS. Yes - there are twice as many little squares to fill out but if you are doing range type on/off/ramps it really doesn't matter.
JHinkle wrote:Below are two timing shots of audio towards the end of Music Box Dancer - I think it sounds like a synthesized string instrument being played.One is showing 25 msec time slices to align a lighting sequence with - the other 50 msec.
The 25 allows you a better chance to hit the onset of the note more precisely - but if it takes twice as long to sequence and you can't see the difference - I'll go with 50.
25 msec:
50 msec:
Joe
I don't disagree that's it better. The question is it worth it. There's no reason not to go with the 25ms if you have a fast enough COM going and not too many channels daisy-chained together. I did it, because at the time, I thought that the all sequences in the show had to be the same timing. Obviously, that was incorrect.
The truth is that very few people could tell the differents. You are talking about 1/40th of a second vs 1/20th of a second. Only Dirk and a few others would notice. Of course it's a quality thing and personal preference. YOu have to do what you think is good. It's kind of like my woodworking. I sand, stain and finish parts that likely only I will ever see.
budude wrote:There's no reason it should take twice as long to sequence at 25 vs 50mS. Yes - there are twice as many little squares to fill out but if you are doing range type on/off/ramps it really doesn't matter.
I agree. It's not equal, but it's closer to equal than being Double.
Been noodling with a position based special effect where the resolution does matter proportionate to the speed at which I choose to run the "explosions". The attached video is a happy medium for the width of our lot, not to fast, not too slow. The resolution here is 20 ms, any coarser and the "rounding error" as the lights turn on becomes very noticeable, to me anyway. The intention is to have this special effect propagate on down the street as more neighbors sign up for coordinated blinky-flashy.


