I'm running grinch off/on only.
I have my main seq. that has 22 ch.on it and it runs just fine.
How evey I have several 8 ch. seq. and when I try to run one of them I get several of the other triax turning on also.
All help greatly apprecited
John
Can you give more detail?
Do you have your plug-in setup correctly?
All of my seq are set to OLSON 595 with ajustable review.
When I run my 22 ch seq every thing works fine it is when I try to run my 8ch seq.
Example
If channel 1 is on MY SET of 8ch ssr then channel 1 on the next SET of 8 ssr is on and the next set of 8 ssr and so on.
somtng4u2c wrote:All of my seq are set to OLSON 595 with ajustable review.
When I run my 22 ch seq every thing works fine it is when I try to run my 8ch seq.
Example
If channel 1 is on MY SET of 8ch ssr then channel 1 on the next SET of 8 ssr is on and the next set of 8 ssr and so on.
I think this is normal - - do you have the plug-in set up to for all the channels (64?) on your 595? If you set it up for 8 and have more physical channels, they will repeat again - so 9 becomes channel 1, etc. Just configure your sequence will all the physical channels you have and leave them empty.
all my seq are set to 64,do I need to use differant profile ? for each one .
What odd is I did this last year and had no problem .
HELP!!!!!!!!!!!!
PLease
i know from woking with 595 last year that each sequnce has to be set to the total number of channels just leave the channels you are not using blank example on the 8 ch seq channels 9 thru 64 will be blank and this will only send the off commands to them others wise as previous stated channel 9 becomes 1 again and so on try just changing the channel count on each seq to 64
ps
you may try creating a new profile with the 64 channel seq then attaching the other sequences to it so the profile keeps the 64 channel count
Created new profile and it did the trick
THANK"S
everyone
somtng4u2c wrote:created new profile and it did the trick
thank"s
everyone
great glad that worked for you now you are on your way good luck
