I'm new to vixen, just learning some of the ins and outs, and I have installed 2.1, just installed and zipped the "visualizer" i guess you would say, i have created my channel lineup using VSB, named all my channels, my controllers are all talking through vixen, but the only thing i had a question on was I do not see a chase button for that pattern. I see all the others, twinkle, fade up/down, shimmer all those good things, but I dont see anything for the chase pattern. Is there something that is a plugin, addin, or just simply a button that is just for a chase pattern in the newer versions or beta versions that is just not in the 2.1 version? Thanks
Julie
In vixen 2.1 you have to do a chase manually by turning on the channel you want the chase to start at and then the next channel and the next and so on.
I haven't messed with 3.0 beta in a few but I think there is a chase button there.
Here is an example
The longer one is a chase around my mega tree 24 ch the smaller ones are chases on the archs
Ok that looks great! Thanks for the pic!!
Have you looked into the HLS sequencer? It's creator posts here quite often and it has it's own forum as well. Nothing wrong with Vixen (talking about version 2.1/2.5), but it's not RGB aware and doesn't have the sense of acting on multiple channels to do things like a chase. HLS has these things and since you're just starting out you don't have to unlearn Vixen like many of us here as it has a very different creation process. Check it out - it's free and can import your existing Vixen sequence(s).
Ok I'll check that out as well!
Thanks!!
And one last questions - I will be using another device which will require that I most likely will have to use vixen for sure. And as I am a still a newbie from above, I have already started sequencing my first song. I have my entire channel line up ( as I mentioned above) made including RGB Floods, and RGB Flex Strips and regular LED's. My question is this - I set up my pixel strings in my channel count through the VSB. But say for instance if I want to change the color of one of the RGB devices to a color that is different from one of the 3 main color combinations - R, G, B, R+B, R+G, G+B, etc. Say if I want like a pinkish color, or a faded purple, or somewhere inbetween the main mixture of those 3. I know there is the RGBLED tool or addin, but it asks for a specific single channel number for which to create that color from. If an RGB channel device takes 3 channels, how does that work? If I want it to be a specific color should I put that color on just the first line or the R line of that RGB device? Does this make any sense? Or am I missing something, like a plugin or addin somewhere? THe other software programs I have used, would group the 3 channels together, and would ask you what color you wanted that channel to be right when you were sequencing that channel. So I just want to ensure that I do this correctly when I want a different gradiant of color for those devices. Any help would be great here.
Thanks again,
Julie
Ok - I found the answer to my own question - it was the RGB Helper zip file that I needed. That was what i was missing!! All I seemed to be missing - up to this point anyway!
Thanks,

