2.5.0.8 problem
 
Notifications
Clear all

2.5.0.8 problem

13 Posts
4 Users
0 Reactions
6,060 Views
Matt_Edwards
Posts: 2664
(@matt-edwards)
Famed Member
Joined: 18 years ago

Sad news I am afraid. These are not random fire SSRs and therefore can not be dimmed.

The data sheet says "Zero Voltage Turn-On". Further the second paragraph
says "The ChipSwitch is a normally open SSR of 1.0 ampere rating with precise zero voltage turn-on and zero current turn-off."


Reply
Daemon
Posts: 431
Topic starter
(@daemon)
Honorable Member
Joined: 18 years ago

Thanks Matt I don't actually dim these channels so that isn't really a drama. I just wonder why they turn straight on when vixen is first run.

I will have to remove them from the display for now.
Thanks for your help


Reply
Mactayl
Posts: 2491
Guest
(@mactayl)
Member
Joined: 17 years ago
Daemon wrote:Thanks Matt I don't actually dim these channels so that isn't really a drama. I just wonder why they turn straight on when vixen is first run.

I will have to remove them from the display for now.
Thanks for your help

On my Crydoms I use a 7404 hex inverter on the input of them otherwise the will be in the wrong state depending on which controller you are using and where you are taking the signal from to drive them.


Reply
Page 2 / 2
Share: