variable speed for ...
 
Notifications
Clear all

variable speed for the tapper

5 Posts
4 Users
0 Reactions
3,991 Views
Posts: 56
Topic starter
(@monteryjack)
Trusted Member
Joined: 19 years ago
[#3557]

I love the ability to "tap" and assign to a channel.

Now it would be awesome to be able to select the speed at which you could tap at.

I.e. use the same 1/4, 1/2, 3/4, full speed as in the main screen.


4 Replies
Posts: 163
(@scharbon)
Estimable Member
Joined: 19 years ago

You already have that capability - its just not in the wizard. Once you have completed creating the sequence using the wizard (except for the tapping out part), select finish - the sequence opens

Select the speed you want the song to play

Click in the first time increment (0:00) in which ever channel you want to tap out

Start the music (F5)

Tap space just like you would in the wizard and it will turn on the time interval in that specific channel that corresponds with the tap.

Clear as mud?

Steve


Reply
Posts: 56
Topic starter
(@monteryjack)
Trusted Member
Joined: 19 years ago

Well I'll be a reigndeer's uncle. It sure is. Thanks. Vixen rocks!


Reply
Posts: 54
(@crazybob)
Trusted Member
Joined: 19 years ago

When I try this, I hold down the space bar for a length of time. I get one "block" or event, then a few blocks where the light is off, then it turns them on for as long as I hold it down. It's like it recognizes the click, then has a delay, then turns the lights on.


Reply
Posts: 210
(@sandy)
Estimable Member
Joined: 19 years ago

And here I've been going back the the setup to do this.
I've had problems with the control key not always recognizing the tap.
But within the program, the space bar seems to hit it every time.

In the immortal words of Nick Danger
"Thanks, half-pint, you've just saved me a lot of investigative work."


Reply
Share: