Sequence Locks Up
 
Notifications
Clear all

Sequence Locks Up

21 Posts
10 Users
0 Reactions
37.9 K Views
rstehle
Posts: 4348
Topic starter
(@rstehle)
Illustrious Member
Joined: 19 years ago
[#4016]

Several times recently when I have been working on a new sequence, the sequence will lock up as I am trying to stop it. I start a sequence with F6, play only a few notes, and stop it with F8, and sometimes get a popup that says "event thread did not terminate in time". The only way to clear it is to close Vixen. Am I doing something wrong?


20 Replies
prof
Posts: 266
 prof
(@prof)
Reputable Member
Joined: 19 years ago

Hi,

I am getting the same problem but my issues are USB related. I have a USB-RS485 converter which is one of a number of devices plugged into a USB hub. I have not tracked it down yet but something connected to the USB hub is disconnecting and reconnecting (It gives the ding dong sound when it does). If I am running a vixen sequence at the time, it gives that same error message when I next stop the sequence.

Craig


Reply
Posts: 705
 KC
(@kc)
Prominent Member
Joined: 20 years ago

Is it only that new sequence? Any difference in the plugins you're using for that one as opposed to previous sequences?


Reply
rstehle
Posts: 4348
Topic starter
(@rstehle)
Illustrious Member
Joined: 19 years ago

This is the first sequence I have begun working on in earnest. In the beginning it ran fine, but I have been experimenting with different add-ins, and using the audio visualizer, and then it began to lock up. I just tried another sequence from scratch, and added a bunch of random stuff, including the waveform addin, and the audio visualizer and it isn't locking up. Don't know what's up with the first one............


Reply
Posts: 705
 KC
(@kc)
Prominent Member
Joined: 20 years ago

If it's just that one sequence, I'd be happy to take a look at it and see if I can make it happen over here. Maybe it's highlighting a hidden bug.


Reply
rstehle
Posts: 4348
Topic starter
(@rstehle)
Illustrious Member
Joined: 19 years ago

Just started getting another error when I hit F6 to start the sequence (same one). Things were working O.k., and then all of a sudden every time I hit F6 I get a "Vixen" popup that says: [Renard Dimmer (Modified)
Acces to Port "Com3" is Denied.]
When I clear the error message, the sequence starts playing, but the message comes up every time I hit F6 now.
More testing, it comes up on F5 or F6, and on every sequence I try.

Rebooted computer and whatever that was went away. Vixen is operating correctly again.


Reply
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago

KC I'm seeing the same issue here. Any time I stop a sequence the app locks. I'm using old sequences (older 2.x) and a USB to RS485 adapter (Open DMX clone). The issue seems to be serial port related.


Reply
Posts: 919
(@scorpia)
Noble Member
Joined: 19 years ago

Dynamo can you check your CPU usage when the sequence stops.

this sounds like the issue i am having as well. I can use the program and then once youtry and stop the sequence or the test suite the program locks and the cpu is sitting at 100%.

About to head to work. Might try and take my adaptor to work and test it there quickly using the new version of vixen.

Peter


Reply
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago

Not 100% for me (51% on one CPU). This is pretty typical when you get an app lock.


Reply
Posts: 919
(@scorpia)
Noble Member
Joined: 19 years ago

still seems very similar to the issue im having.

also i noticed i can get the same problem if i just start up a profile. leave the sequence blank and go into the channel test app. i can test the channels for as long as i want but when i go to leave the channel test it locks up as well.

have you guys tried the channel test to see if it does the same?

Peter


Reply
Page 1 / 3
Share: