NI PCI-DIO-96 Plugi...
 
Notifications
Clear all

NI PCI-DIO-96 Plugin Problem

4 Posts
2 Users
0 Reactions
2,593 Views
Posts: 29
Topic starter
(@ttr502)
Eminent Member
Joined: 19 years ago
[#2452]

First, I am a newbie to sequencing light shows and this forum, so be gentle in your responses. Second, this past Christmas my kids showed me all of the light shows on YouTube, etc, and wanted to do something similar. Third, I am an automations engineer with access to some old PLC parts and industrial DAQ cards such as the NI PCI-DIO-96. So with that in mind I started doing some research on how to use the 96 channels that this card provides to put together some sort of a show. I then discovered the Vixen software and was amazed with its options and capabilities. I also was surprised that it had a plugin to run the PCI-DIO-96. I have Vixen v2.0.5.0 loaded and it does great with the adjustable preview. But when I try to load the plugin for the DIO card, I get a “The specified module could not be found. (Exception from HRESULT: 0x8007007E)” error for the NationalInstruments.DAQmx.dll: file. The DIO card is installed correctly and I can run the LabView software from NI to test the outputs successfully with a DVM, so I am pretty sure I do not have a hardware issue. Is there another plugin I could try? Does it matter which version of the NI DAQmx driver is installed? If so, which driver version is the correct one? Can anyone help me out here?


3 Replies
synnie
Posts: 419
(@synnie)
Honorable Member
Joined: 19 years ago

Hi TTR and welcome to DIY....at present Vixen 2.0 is unable to run the NI PCI DIO96...if you still want to use the PCI board go to http://www.vixenlights.com/downloads.html and download Vixen 1.1, instructions on how to load the plugins etc are there also.This version is known to work with the NI PCI DIO96 and since all you can do is basic on/off then you wont need to worry about the dimming and such. Any version of NIDAQmx will do. You will need to run buffers between the PCI card and SSR's or what you will use to switch the lights. I use ULN2803 chips . if you do a search in DIY for PCI DIO96 there should be enough information on switching it all.

I use 2 cards for my display , it isnt a big one (small front yard) but i have used them for 2 years, doing more each time.
Cheers
Syn


Reply
Posts: 29
Topic starter
(@ttr502)
Eminent Member
Joined: 19 years ago

Thanks for your quick reply and I had searched past threads for info, but I was using "PCI-DIO-96" in the search and not having any luck. When I tried the "PCI DIO96" as you suggested, I found a lot more threads to read. I am a little disappointed that the newer version of Vixen cannot use these cards. I installed Vixen 1.1 and the 8.3 NI driver as suggested in one of the threads on my soon to be Xmas Computer and all seems to be well. I am still impressed with its capabilities and options. It will do every thing I need it to do for my first show. But as I mentioned, I have "recycled" a NI card that was replaced by another upgraded control system. Also, I have some other "recycled" equipment from other control upgrades that look like they would make great SSR's. This is all early 90’s equipment, and is some of the last bound for the dumpster. I also have an old 10Mb 16 port hub that I plan to convert into a buffered break-out box. Basically, I am only going to use the enclosure, power supply, and the 16 RJ-45 ports on the front with some new buffer circuitry inside and two 50 pin connectors on the back for the ribbon cables from the PC. I am a pack rat of old equipment, and in this case, I am actually going to use some of it again, but not in it's original form. Now on to the next step of building and testing an 8-channel setup before taking the big plunge. My wife has already told me that I am enjoying this too much already, and wonders how long it will be before she has to do an intervention with my new addiction. Thanks again.


Reply
synnie
Posts: 419
(@synnie)
Honorable Member
Joined: 19 years ago

First comment is for your wife.... she needs to 1> get used to the idea as it only gets worse on her perspective 2> Help your addiction 3> Find a hobby......lol

My DIO96 cards are used items ex ebay, bought PCB's from wjohn for the AC lights SSROZ's, using the ULN2803's to control them and they also do the switching for my LEDs

Have DCSSR's for this year as i am slowing converting everything to LED and will be using DC power supplies.

Syn


Reply
Share: