If you are getting the dreaded com error that states "access to com port X is denied" then please post the details here.
Does it happen in the same spot every time? Is the same port indicated every time? Any recent changes? Are you using profiles? Are you running a program or just looping a sequence? What plug in are you using? What timing interval are you using? Are these converted sequneces?
The reason I ask is that I have 2 programs for my display. One is the standard 5 sequences, about 12:10 long. Then I have another program that has the same 5 sequences but a voiceover is added in between each sequence to indicate that portions of the display are not working due to the weather. The "Partial Weather Outage" program is the one giving me the com error. It happens every time I run it. And it happens in the same spot time and time again. I have noticed the com port indicated changes from com 1 to com 2.
I have zipped up my install and KC is working with it. Hopefully since I narrowed down the cause if my issue these details you provide will help to narrow it down further.
Is the same port Indicated = YES always COM 4 for me. It says COM 4 is in use but when I exit and restart vixen it usually works for the night.
Does it happen in the same spot = YES right after the first song is over.
Any recent changes? = NO
Are you using profiles? = YES
Are you running a program or just looping a sequence? = PROGRAM
What plugin = NEW Renard beta 5 and the other experiment renard plugin for beta 4.
What timing interval are you using? = 100ms
Are these converted sequences? = NO
Macrosill wrote:If you are getting the dreaded com error that states "access to com port X is denied" then please post the details here.Does it happen in the same spot every time? Is the same port indicated every time? Any recent changes? Are you using profiles? Are you running a program or just looping a sequence? Are you running a program or just looping a sequence? What timing interval are you using? Are these converted sequneces?
The reason I ask is that I have 2 programs for my display. One is the standard 5 sequences, about 12:10 long. Then I have another program that has the same 5 sequences but a voiceover is added in between each sequence to indicate that portions of the display are not working due to the weather. The "Partial Weather Outage" program is the one giving me the com error. It happens every time I run it. And it happens in the same spot time and time again. I have noticed the com port indicated changes from com 1 to com 2.
I have zipped up my install and KC is working with it. Hopefully since I narrowed down the cause if my issue these details you provide will help to narrow it down further.
Here's mine, only for Beta 4, I don't plan on upgrading because that bet'as been enough problems.
It's always COM1.
It's never in the same spot.
it's never in the same program, or sequence.
It happens totally randomly. Tonight it happend twice. Last night, once. The two days before that, no problems. Before tjhat, it was at least once a night. Again, ever the same time interval. Doesn't matter the sequence or program.
It has done it running the Renard Dimmer. I switched to the Renard Modified because someone thought that could fix it. Still happening.
Timing is 50ms.
These are not converted sequences.
Someone please figure this out. As soon as I finished writing this, i had three cars pull up to watch. After a 5 minute radio spot this morning, I can only imagine how many didn't get to see it.
Have you zipped up your vixen directory and sent it to KC? Zip up the directory minus the audio and send it to me at eberletj at cox dot net and I will review it.
I sent it to you, thank you very much.
I had a neighbor come over last night. Said at least 100 cars drove by the house, and it was all dark. Theywas having a party, and told everyone to stop by on theuir way to the party.
