KC -
I've just tried to do some simple output channel mappings, and found some problems.
I have about 25 light channels in my profile. When I map these, I will need to put them into about 6 * 8 = 48 channels, with different orderings. The 48 channels is due to the boards being positioned in different places, so not all channels of a particular dimmer will be used.
I suppose I could add some empty channels for this, but there's another problem. When I tried to right-click the channels, select Toggle Output Mappings, then double click on the arrows that appear, I load up a form which has "Channel Output Mapping". However, the listbox is blank. This is due to the sequence being on a profile, so the output mapping must be looking in the sequence for the data.
How should I implement this.
flowblock,
You are right, it only gives you an empty box. Go into the Profile manager and choose the profile you are using. Once that profile comes up click on the top left icon in the "edit a profile" window. That will allow you to edit the channel output mapping.
OK, thanks. I did wonder if the channel order was what I was looking for.
So, the only/best/easiest way to do the blank channels is just to throw in some more empty channels?
And, which order does vixen use to output the channels? The natural order? Or the last selected one?
Flow,
Toggle output channels and channel reordering are 2 different things.
Toggle output channels actually sends the data of one channel to a different one, as set by you. In this case channel 1 can actually output to channel 59 or any other channel you choose. But you must then change the output of channel 59 so both channels do not send data to the same output.
Channel Order is just a re-location on the screen to help make sequencing easier. In this case channel 1 outputs to channel 1.
With that said you can add blank channels or change the outputs. Personally I would just add blank channels to keep things in order. Changing too many channel outputs can get real confusing quickly.
