Memory consumption
 
Notifications
Clear all

Memory consumption

14 Posts
8 Users
0 Reactions
3,179 Views
Posts: 353
(@stempile)
Reputable Member
Joined: 19 years ago
Slush wrote:Tonight I ran my sequence with a different profile. I removed the adjustable preview from it.

The memory leak was gone. I ran all night with no extra memory used.

I build the adjustable preview and the plugin for the control hardware, but don't run them at the same time. I turn off preview the show and turn on the controller plug in. When designing I only run the preview.

ms


Reply
wjohn
Posts: 1102
(@wjohn)
Noble Member
Joined: 20 years ago

I am still getting the memory leak, and I dont have the adj Preview plugin loaded.

Looking at resoruces, VIXEN will start with ~160k, and by the time the PC locks up, VIXEN has 300k allocated to it. Processor usage is 2%, with spikes to 20$ every 5-6 sec, and a 70-90% spike on changeover between songs.

For now, I am realoading W2K each day, and keeping the show to about three hours in duration.


Reply
Posts: 705
 KC
(@kc)
Prominent Member
Joined: 20 years ago

Hopefully, this will be resolved with the next update. I found a decent profiler, and according to it, things are pretty buttoned up now.


Reply
Posts: 95
(@fcky529)
Estimable Member
Joined: 19 years ago

I'm running a basic parallel (8 channels) off of an old amd K6 @ i believe 486 MHz with 376 MB RAM 2 100MHz and i seem to have no problem whatsoever. I am running Win XP SP2 and vixen, nothing else although i haven't ran a schedule yet. No preview either, that's what the front yard is for 😈


Reply
Page 2 / 2
Share: