51 millisecond timi...
 
Notifications
Clear all

51 millisecond timing

5 Posts
4 Users
0 Reactions
1,032 Views
Macrosill
Posts: 9740
Topic starter
(@macrosill)
Member
Joined: 20 years ago
[#360]

I decided to have some fun and try to wreak havoc on Vixen. I was creating a new sequence and accidentally missed the zero button and hit p instead. I was trying to enter 50 for the ms timing. I got a pop up window telling me 8 in not a valid value, or something like that. I thought to myself "cool, I can not enter a wrong number". But then I decided to try and odd number like 51. Sure enough it worked. The sequence was created. I did not get any errors but what was odd was the timing marks in the sequence editing window. I have attached a portion of a screen shot. Notice the 1, 2, 3 and 4 second timing marks are off from the boxes. This is not an error but I could see it causing a problem or confusion for some in the event the wrong number is entered.

KC, can a timing standard be made so someone can only use a select number of timing such as 25ms, 50ms and 100ms intervals.

Just an idea.

51ms 193

4 Replies
Posts: 339
(@dan-ross)
Reputable Member
Joined: 19 years ago

I have nowhere near the amount of experience as most of you guys, but I would think this might be helpful. If the beat of the song is off from the timing mark you could just up it from say 50ms to 53ms. Am I thinking correct or am I way off on how this would work?


Reply
RJ
Posts: 673
 RJ
(@rj)
Prominent Member
Joined: 19 years ago

Brian one of my seqences is at 44 ms events as this worked out to the timing of the music. It made the beats fit evenly.


Reply
Posts: 705
 KC
(@kc)
Prominent Member
Joined: 20 years ago
RJ wrote:Brian one of my seqences is at 44 ms events as this worked out to the timing of the music. It made the beats fit evenly.

There goes my example. RJ's post says what I was going to say.


Reply
Macrosill
Posts: 9740
Topic starter
(@macrosill)
Member
Joined: 20 years ago

Okay, Okay. You guys win. It was just a thought. 😆


Reply
Share: