Photovor wrote:Yep, he uses the A6281 chip. Figuring I have no way to etch boards, and program the chips, this is pretty reasonable to me. This was more attractive to me over the JEC pixels, because of the simplicity.Just wanted to share my findings.
It's a 16 pin QFN package with leadless pins on a tiny, tiny pitch. We tried doing a home-etch board for these and failed miserably. Soldermask is required for any amount of reliability.
I noticed that on Hackaday too. I wondered if there was a Vixen plug in for it. Guess not yet. Sorta thought it was a pixel without DMX.
Wonder how far apart these work. Noticed that the connector cables they have are all rather short.
David
I ordered one so I can play. I'm considering using these next year to light under soffit. I'm imagining that the plugin will be close to a 595, but I'll find out. Might have to get into the plugin development... hopefully those 15 years of VB will help 😉
JEC wrote:It's a 16 pin QFN package with leadless pins on a tiny, tiny pitch. We tried doing a home-etch board for these and failed miserably. Soldermask is required for any amount of reliability.
Yeah, not something I'd even want to attempt. I saw how he first prototyped it, with little jumperwires, what a challenge.
I don't want anyone to get me wrong, but I"m not against anything JEC has done with his Pixels. I'm all about supporting our fellow creators, as I've done with the renard and olsen. It's just the simplicity that does it for me. In this world, if I can't get it to work with vixen, without some serious plugin design, I can at least hack together something custom through a pic or VB prog. I'm not trying to create competition between products or anything like that, just helping come up with and developing alternatives.
For what it's worth, I'll have a DMX-->A6281 bridge board ready in a month or so.
Bridge board. Perfect!
