Let's get some chatter going, peeps! It's too quiet.
I actually had a rather productive "Christmas" day today. Here's a summary:
- My roofline pixels were misbehaving when I tried to use them for Valentine's day and a few other after-season times before I took them down. It's been on my list to look into that ever since. Today was that day. My son Andrew and I laid them out in the yard, we connected them up as if they were on the roof. They worked fine. Not sure what the issue was but maybe it was a config thing with my Falcon Player, which I use for the off-season stuff but not for my Christmas display. Something to figure out in October when I'll use it for Halloween.
- At the MN mini I got some new Pixabulbs to replace the string over our garage, which didn't get replaced when I replaced the whole roofline a few seasons back (I misordered). That string was slightly too short (the old ones had a larger bulb spacing) so I made a little string of 6 lights to go at one end to make up the difference.
Andrew helped me with that too, then he had to get ready for work.
- I had a Falcon differential card be flaky on me last season. I made it work, but I needed to look at it. Long story short, I never did figure it out, but as luck would have it, someone had one in a Free box at the MN Mini. Knowing mine was flaky, I grabbed it. It's now been swapped out and all works.
- Tested my Wasatch Quad Pro controller, which was new last season, with a "dumb" expansion card. It worked great. This is how I'll be driving half of my new pixel candy canes this season (the other half will be a smart receiver whooked to the differential card in #3 above- that card actually came in the mail today perhaps kicking off this entire flurry of activity)
- Spent several hours, with the assistance of my lovely wife, going through channel assignments in controller configs, LOR network setups. and prop definition screens. Everything should be ready for my new canes this season... well except for all the sequencing I need to redo for them.
So who's working on display stuff? Let's hear about it!
- I just finished wiring up one of my 4 new singing faces. Not tested yet.
- 5 Vertical pixel strips are ready to be integrated into my Arches. Needed for my new little drummer boy song from "God & Country".
- 2 New 24 x 24 (4'x4') pixel matrix panels are populated and half wired. These will be new accents on the edges of the show.
- 1/2 of my roof outline is in the family room getting a new power distribution system. Upping the input voltage to 24v. Also switching to white wire. Wife did not like the black feed lines.
My story:
THE TEMPLE OF TWINKLING LIGHTS
A Multi‑Chapter Holiday‑Lighting Epic
CHAPTER I — The MiniRen Expedition
My workshop had become a dig site again — wires draped like vines, extension cords laying on the floor like pythons ready to strike, solder smoke curling like incense, and me hunched over the bench like an archaeologist decoding ancient glyphs.
The first relics I uncovered were the three MiniRen 8/3 controllers. I assembled them with the reverence of a museum conservator restoring artifacts from a lost holiday empire. When I powered them on, they hummed to life without smoke, sparks, or spontaneous combustion.
A rare victory.
But danger was already creeping in.
Two of my Renard SS24s had fallen silent, victims of a treacherous triac failure. Repairing them felt like disarming booby traps left behind by mischievous elves. One wrong move and I’d be reenacting the rolling‑boulder scene from The Raiders of the Lost Ark — except the boulder would be a flaming controller.
I survived.
Barely.
CHAPTER II — The Sequencer’s Curse
Sequencing is supposed to be peaceful - Right? It wasn’t.
The office was quiet. Too quiet.
The lights buzzed overhead like angry insects, casting long shadows across stacks of papers, controller schematics, and half‑finished wiring diagrams. My desk — cluttered with coffee mugs, pixel notes, and a desktop that had seen more action than most field gear — looked less like a workspace and more like an archaeological dig site.
I powered up the desktop.
The screen flickered to life, illuminating the room with a cold blue glow that made the walls look like ancient stone. The hum of the computer fan echoed through the office like distant chanting from a forgotten temple.
Then the sequencing began.
Long nights in that cramped office, the glow of my screen cutting through the air like a torch in a tomb. The music looped endlessly, bouncing off cabinets and whiteboards covered in scribbles. Every beat felt like it awakened something lurking in the shadows — something old, something watching.
The sleigh bells chimed again. Bright. Cheerful. Innocent.
But in the silence of the office, they sounded wrong — like ceremonial chimes used to summon spirits best left undisturbed.
The lights flickered.
A stack of papers slid off a shelf with no explanation.
My swivel chair rotated slowly… on its own.
I froze.
The Sequencer’s Curse had begun.
Every time the music looped, the office seemed to pulse — the lights dimming in rhythm, the AC rumbling like distant thunder, the shadows shifting as if syncing themselves to my timing grid.
A stapler clattered off the desk.
I spun around, heart pounding, only to find the cabinet slightly ajar — its contents rattling as though something inside was trying to escape. The PX‑1 relics hummed softly in their boxes, reacting to the disturbance like they recognized the curse.
The sleigh bells chimed again.
This time, the office answered.
The lights flickered violently, buzzing louder, brighter, then dimming to a faint glow. My desktop stuttered — the sequence freezing for a moment — and the entire room seemed to lean in, waiting.
I slammed the spacebar.
Playback resumed.
The lights steadied.
The shadows retreated.
The office fell silent once more.
Finally, two sequences finished, started a third and polished older ones to be used this year.
I exhaled slowly, gripping the edge of the desk. The Sequencer’s Curse was real — and it wasn’t finished with me yet.
CHAPTER III — The Arrival of the PX‑1 Relics
I didn’t find the PX‑1 controllers buried in a cabinet or a random box.
I received them — passed down by old forum members, MartinMueller2003 and Dirknerkle, like sacred artifacts being transferred from one curator to the next. They arrived wrapped carefully, handled with reverence, spoken of in hushed tones.
These weren’t controllers. They were museum pieces.
Relics from the dawn of pixel technology. Veterans of countless seasons. Survivors of questionable wiring decisions.
Opening the package felt like uncrating an exhibit from the Smithsonian. Dusty. Weathered. Mysterious. Each PX‑1 carried the weight of history — faded labels, scratches from battles fought long ago, and an aura that suggested they had witnessed things mere mortals shouldn’t attempt with 5V or 12V pixels.
I swear one of them looked at me.
CHAPTER IV — Origin of the PX‑1: The First Lightbearers
Legend says the PX‑1 was forged in the earliest days of RGB magic, when the First Lightbearers sought a way to bend color itself.
They built the PX‑1 from:
- Copper mined from the Caverns of Continuity
- Firmware etched into silicon tablets
- Jumpers carved from the bones of retired extension cords
The PX‑1 was powerful — too powerful. It could command pixels with a single pulse. It could summon color storms. It could crash displays with a misplaced jumper.
The Lightbearers sealed the relics away, entrusting them only to those brave (or foolish) enough to wield them.
And now… they were mine.
CHAPTER V — The Resurrection Chronicles
I consulted the ancient scrolls — two legendary sagas found within the pages.
The Spotlight Resurrection Project — A Garage Wars Saga
A tale of forgotten props reborn, of dusty artifacts pulled from the shadows and restored to glory. A garage transformed into a battleground of creativity and chaos.
What’s Old Can Become New — The Snowflake Resurrection Project
A saga of snowflakes so ancient they were practically collecting Social Security. A story of dust, determination, and the heroic journey to rebuild a prop that had seen more winters than a polar bear.
These weren’t forum threads. They were scriptures.
Proof that old tech can rise again with enough stubbornness, PVC pipe, and questionable decisions.
CHAPTER VI — Garage Wars: The PX‑1 vs. The Snowflake Elders
It happened on a stormy night.
The PX‑1 relics began to hum — softly at first, then louder, vibrating with ancient power. The Snowflake Elders, awakened by the same energy, flickered to life in the corner of the workshop.
A confrontation was inevitable.
The PX‑1 relics unleashed pixel pulses — shimmering waves of RGB energy. The Snowflake Elders retaliated with blinding white light — the kind that make neighbors call the power company.
Snap‑In #14 tried to electrocute me again. I dodged. Barely.
The battle raged until dawn, when both sides finally exhausted their power supplies and collapsed into silence.
I stood among the smoking controllers, victorious.
Mostly.
CHAPTER VII — The WiFi Ascension
With the relics subdued, I pressed deeper into modernization. I converted every Renard controller to WiFi, forging snap‑ins like enchanted talismans.
I built so many that I started naming them.
Snap‑In #14 still hates me.
CHAPTER VIII — The Seed Pixel Prophecy
I dove into research like a treasure hunter studying forbidden scrolls. Forums, diagrams, legends of seed pixels. I asked questions, pieced together clues, and finally placed the order.
The prophecy says:
“When the seed pixels arrive, the Lightbearer shall awaken the ancient controllers and command the sky itself.”
I don’t know if that’s true.
But I’m ready to find out.
CHAPTER IX — The Season Approaches
My MiniRens stand ready. My SS24s are repaired. My PX‑1 relics hum with ancient power. The Snowflake Elders watch silently from their shelf. The resurrection chronicles guide my hand.
And I’m prepared for whatever glowing mystery comes next.
Be careful of the basement engineers. They are looking for a new place to haunt (er help). They liked those snap-ins and had a good relationship with the PX-1s, If you find a mysterious mess in your basement, then you know you have new tenants.

