alright i have been researching and have ben told many different things but what is the purpose of an LED Driver and why do we need one? is there a way to go safely around using them, are they only used on high powered led's or 120v configured leds?
Wow, You are asking so much, it is difficult to know where to start.
There are plenty of threads detailing how LEDS work.
In short, LEDs are a current driven device. This means the idea manner to drive an LED is a Constant Current source, typically 20mA per single string.
Most people (including yours truely) get away with a decent SMPS (constant voltage) and a current limiting resistor. Linear PS are OK but I have been fearful that mains voltage variation is too great in my area so I have avoided them. We live in the Hills and when Tree brush the wires, there are also sorts of voltage incidents introduced.
LEDs can't be dimmed uniformly with a voltage dimmer, they need PWM (there are a number of threads about this topic alone) and LED Drivers assist here greatly.
I am not aware of any LED drivers being used for 120v - so some one else can chime in.
I am using some LED drivers on one of my latest designs, where I have 3 LEDs per channel. When I did the sums, it end up being smaller and cheaper. The beauty is my 12 supply can vary down to 10v and there should be no resultant change in the LED output! that is cool!!!
griffixdc wrote:alright i have been researching and have ben told many different things but what is the purpose of an LED Driver and why do we need one? is there a way to go safely around using them, are they only used on high powered led's or 120v configured leds?
Another purpose is that the I/O pins of a microcontroller and many other types of chips are usually only able to provide a small amount of current and voltage. If multiple LEDs (or a high-power LED) is/are connected directly to the I/O pins in certain ways, it can cause damage unless a "driver" is placed in between. In this case, the driver is acting more like an amplifier.
There are certain conditions where they are not needed, but it depends very much on the circumstances. If you have a more specific example in mind, someone could provide more precise advice.
don
Ideally it would be nice to have more information about what you want to do.
I've typically seen "driver" refer primarily to high-power LEDs, because with them a current limiting resistor would be impractical, so constant current switching regulators are used. Those are the "driver". There are some drivers designed specifically for running series arrays of high-power LEDs (like Luxeons) from 120VAC. For series strands of small (20 mA) LEDs, people usually just use current limiting resistors (this is what nearly all LED Christmas strands do.)
For smaller LEDs, people usually just use dropping resistors and don't use the terminology "driver".
i guess i am more or less a loss of words...when looking at led lights and or pre configured led lights i notice drivers or some needing drivers i am just wanting more of an idea as to why we need them and if so what are thier benifits of having them....i am really not aware of resisters limiting current maybe thats why i am having a hard time picturing this...i have always thought as resisters to limit voltage to reduce voltage not current
???? so i guess i have more to find out before i can ask more specific questions but as it stands i am still in search for what they really do. 🙂
