Do you have any documentation on your display, do you set it up from memory each year or just fly by the seat of your pants year to year?
I have seen some who have dozens of binders which contain measured scale drawings of every element and its placement. I also know some that do not have anything other than memory year to year.
I was looking at plastic binder pages earlier today that contain 9 pockets for digital media. I am thinking of setting up a binder with print outs of the display set up as well as controller and channel setup along with copies of everything on thumb drive. Then have copies of media for both Pi's ready to go in case it is needed. Those 9 media pockets would fill up fast. I am tired of trying to find back up copies and getting things to work right year after year when laptops and hard drives seem to fail and/or break all too often.
If you have documentation how detailed is it and how do you store it? How many backups do you have? Where do you store all this stuff?
This is only my second year, but I learned a lot about how much you can forget in a year. 🙂
On the digital side, I use Google Keep and Google Sheets to keep track of what I did for the show and anything I might want to know in the future. That way things are accessible from almost anywhere and are backed up via Google. I've also used the various export/backup functions of FPP, Vixen, and the like. Those files I keep on my computer and a backup on an external hard drive.
For the physical items, I went with a bag and tag approach when I put the show away last year for my wires and cables. Label maker to know what the cable was used for the prior year, then coil and store in a zip lock bag. That seemed to work well for me.
I have spreadsheets in my google drive where I keep all my display info. Props, channel counts, controller ports, power usage per psu etc. I can pull it up from my phone if I need it while on the roof or whatever. I can't imagine having it all on paper and my display is only like 2500 pixels.
I have a spreadsheet like most that shows where each strand is connected to my controllers
I also did a full scale drawing and wiring schematic click here
I save screenshots of my controllers and Pis to be sure I preserve the settings. Its all digital and saved in the cloud.
When setting up I only use the spreadsheet and the drawings.
JCook wrote:I have a spreadsheet like most that shows where each strand is connected to my controllers
I also did a full scale drawing and wiring schematic click here
I save screenshots of my controllers and Pis to be sure I preserve the settings. Its all digital and saved in the cloud.When setting up I only use the spreadsheet and the drawings.
what did you create the drawing in? Looks clean and sharp!
DrewDennis wrote:what did you create the drawing in? Looks clean and sharp!
I used AutoCAD 2005, I use an older version because its not used often and its so expensive to upgrade. If you look around there are some cheap and/or free software out there. Try Google sketchup.
The only real documentation I do is inside the controllers themselves. I tape a spreadsheet in each controller that has the controller name(Controller 1, 2, 3, etc.) and a list of the channels that get connected to that controller. That way there's nothing really to remember during setup, just look in the controller and plug in what it says to plug in.
JCook wrote:I used AutoCAD 2005, I use an older version because its not used often and its so expensive to upgrade. If you look around there are some cheap and/or free software out there. Try Google sketchup.
you willing to share the cad file. I like it because of the modeled controller/electronics pictures you did. Oh and great work! :thup2:I started mine back in the day with autocad 2000 but I got so involved in modeling my hardware due to ocd, I gave up....:sad:
I used to use a spreadsheet but I found that it's tedious to maintain and seems to be double data entry anyhow. I also find that paper goes out of data faster, and gets lost easier. So I use the software itself for most of the connection and channel information now. DIsplay setup in Vixen does a pretty good job of quickly showing you what's connected to what and what channels are what.
As far as wiring, I label most of the wiring and props that can be confused. I need to get better at this. I find that I get lazy during takedown. I'm so focused on getting things down and into the house out of the cold that I fail to spend time labeling things. I have too many SPT cords this year that are made to length and have no labels. So I've been labeling them as I put them out.
For me, storage is also important in planning. I pack things away based on where they go, and also when they go up. There's a lot I put out for Halloween, and some I leave out thru Easter. This applies especially to some of the more generic things like power cords and floods. So I try to make sure that the right cords are packed with the right stuff so I find it all together when I need it.
Some of my instructions are on the equipment itself, or inside of the containers. I have spacing and measurement reference instructions written in sharpie on the inside lid of my minitree crates. The wire harnesses for those trees is also made to length, so it serves as a template when I stretch it out. Same thing for the arches. Those don't have a crate, so there's P-touch labels on the arches themselves. All of my controller enclosures have the channel/address type information written on a piece of tape inside the door. Consistency also helps. Everything is set up left to right or house to street or bottom to top. If you don't need to stop and think about what direction things go, it goes much faster.
I try not to get too fancy with documentation while out in the yard. A sharpie and painters tape goes a long way. The sharpie is always in my pocket anyhow. I can write directly onto many things like plugs, boxes, wires. Those things i can't write directly on, will get a piece of tape to write on. Things I need more permanent, I'll go back and replace with p-touch labels later. Clear heat shrink over P-touch labels on wires makes them far more permanent.
I think it's easy to fall into the trap of over-engineering DIY projects and my only roadmap is an annual layout of the house/yard and where I want various display pieces to be. Because each piece has its own, dedicated wireless controller, my only concern for cabling is providing power to each and changing the display from year to year is a piece of cake. For example, channels 113-116 are reserved for minitree-1 in all my sequences. I can put minitree-1 anywhere I want out in the yard (or a neighbor's yard or across or even down the street) and whenever those channels fire, that minitree is lit. The only cabling concern is providing AC power to the display piece itself.
