Caution to newbies: this hobby is incredibly addicting. Here's an estimated breakdown of the costs of getting in at the 64-channel level.
$10-15 --- Blank controller board (Grinch or Olsen 595)
$18-$40 --- Controller board parts (Grinch is about $18, Olsen 595 about $40)
$12 each --- Four-channel SSR controller & parts (You need 16 of them)
$75 --- Category 5 wire (approx 1000 feet)
$200 --- Connectors, A/C power cables, screws, nuts, cable ties, tape, etc.
$5 each --- Light strings (100 lights/string - prices vary widely)
Total all this up, and you'll spend about $800 to put a 64-channel system in action with a Grinch or Olsen 595.
If you go the Renard way instead of choosing the Grinch or Olsen 595, three SS24 Renard boards (24 channels each for a total of 72 channels) and parts will set you back about $180, but then you don't need all the SSRs, cat5 wire and most connectors since the Renard boards incorporate the SSRs natively. However, you'll still need to run long A/C current wires from the Renards to your light strings, and you'll still use supplies such as screws, cable ties, tape, etc.
The GOOD news is that it's a LOT of fun, and you don't have to start with 64 channels! Build a 64-controller, 2 or 3 SSRs and get started with only a dozen or so strings. You can grow with the hobby, and it's one that will be fun for years and years.
Advice: Marry an extremely forgiving and loving spouse whichever way you go.
http://digwdf.org/store/
Even though the DIGWDF Store has been closed for eight years, it's still awesome!
User guides, documentation and firmware files are still free and available for downloading.
dirknerkle wrote:Total all this up, and you'll spend about $800 to put a 64-channel system in action with a Grinch or Olsen 595.
Shhhhhhh! You're gonna scare 'em away!
dirknerkle wrote:
Advice: Marry an extremely forgiving and loving spouse whichever way you go.
Or just hide it well... You can call it 'Creative Financing' 🙂
2007: Staic Display
2008: 15000+ Lights, 128 Dimming Channels
2009: 31000+ Lights, 400 Dimming Channels
2010: Ahhhh.. I worry about that later 😉
www.christmasonthebayou.com
[/SIGPIC]
I am a newbie here and went the Ren24 route. So far I can account for about $450 into this new hobby. ~$200 on 2 controllers, ~$100 on a new soldering station, blew up a few parts and had to order more (also picked up a few extra of most everything) and misc., $100 in 50 more mini lights, $50 in 6 foot extension cords and I'm sure I'm missing some things.
But at the same time I am fighting myself not to shout out "Hey does anyone have any Ren24 boards that they want to sell??!!" I just looked a little closer at the Trik boards, my hands are shaking to get some of those. But no, no, no... I still need about another $100 for SPT1 wiring and connectors, pvc pipe for my leaping arches so I will continue to try and not buy more boards. But it is a long way off until the holiday season, I'm not sure if I can make it or not. (My channel count is a little tight and another Ren24 would ease that issue) This hobby is veryyyyyyyyyy addicting!!!! And I love it!! 🙂
Just wanted to say that while this hobby can be expensive, it does not "have" to be. With some carefull internet scouring and searching you can usually find some very good deals. I started last year and have two ren-c, grinch set ups, I found 1000' cat5e for $40.00 shipped, 300 8 amp triacs for $30.00, 200 rj45 jacks for $20.00 and many other good deals. I have between $350.00 and $400.00 invested for 128 dimming channels for last year.
We are adding more this year (LEDtriks here I come). I also picked up a dedicated show computer, 3ghz P4, 1g ram, 250g HD, 512mb video, ($36.00 find on ebay.) I even found a Sealevel 172331, 4 port 485/422 serial card for $34.00 shipped (now if I can just figure out how to configure it properly.)
There are great deals out there, you just have to look for them. Start looking for them early (like day after Christmas) and have fun with it.
I'm quite new to this hobby and to the DIYC forum, too, and one of the best startup costs I've incurred was to become a supporting member of DIYC.
It's only $20 for a year, and the amount of assistance, information and help I've received here even in the past couple weeks has saved me much, much more than that. It's the best $20 I've spent so far and I heartily encourage others to do the same. It will come back to you many times over.
http://digwdf.org/store/
Even though the DIGWDF Store has been closed for eight years, it's still awesome!
User guides, documentation and firmware files are still free and available for downloading.
It has been my experience that you tend to spend as much, if not a little more, on extension cords as you do on channels. While you may endeavor to get as many of your controllers as close as you can to what they are controlling, you will still need to run extension cords to many of your display items/areas. Many newbies tend to forget about them.
You may also need to run cords from the house TO the controller. Sure, you save 32 cords by putting your controllers under your Megatree, but did you forget the 4 100' 14AWG cords that go TO those controllers? :p
Thankfully, extension cords should be a one-time investment. Properly handled and stored, they should last the lifetime of any display.
--------------
If using incandescents, you should also budget money to replace 25 to 30 percent of your lights year after year. Clear lights last many years, while colors need to be replaced much sooner. This is especially true of blue sets which tend to only last a year.
--------------
Also, don't forget your storage needs. Let's forget about the fact that you'll end up needing a shed soon enough (:razz:) and focus on storage containers.
All those lights, cords, and other fiddly bits require someplace to live in the off season. Since controlled displays tend to be large displays, you'll need to organize all your stuff. Bite the bullet early and buy hinged commercial style bins. Not only can you load more into them than you can possibly carry, you don't have to worry about the tops collapsing when you stack them 2 or 3 high.
-Mike
www.LandoLights.com
www.SequenceCenter.com --> Vixen/LOR Sequences and More
ORGANIZE! The most important decision you can make for your display. That way, when you realize that you need more extension cords than your garage currently has, you don't have to spend 2 hours in a storage unit searching for a bin while stuff is falling on your head.
Now I didn't learn that first hand *looks around*
Check out what the Extreme Lighting Products Shop is selling!
chilloutdocdoc wrote:ORGANIZE! The most important decision you can make for your display.
IMHO, organization is the key to everything. From taking the time to label and arrange parts for your next build, to labeling what is in all those bins!
-Mike
www.LandoLights.com
www.SequenceCenter.com --> Vixen/LOR Sequences and More
Extension cords were the killer for me, but the addiction sometimes leads to purchases that are not really needed. After all of the first year expenses, its still more than worth it when you see all your planning and work in action.
Great Hobby!
As always, Thanks for any info!
As for prices for extension cords, I load up on the indoor 6ft ones (18ga, spt-2, Home Depot) everytime that Home Depot puts out sales on the type of save $10 off $50. Always pick up cords when they're on sale, YOU'LL NEED THEM!
Check out what the Extreme Lighting Products Shop is selling!
dirknerkle wrote:...$10-15 --- Blank controller board (Grinch or Olsen 595)
$18-$40 --- Controller board parts (Grinch is about $18, Olsen 595 about $40)
$12 each --- Four-channel SSR controller & parts (You need 16 of them)
$75 --- Category 5 wire (approx 1000 feet)
$200 --- Connectors, A/C power cables, screws, nuts, cable ties, tape, etc.
$5 each --- Light strings (100 lights/string - prices vary widely)Total all this up, and you'll spend about $800 to put a 64-channel system in action with a Grinch or Olsen 595.
...
Advice: Marry an extremely forgiving and loving spouse whichever way you go.
To show that DIY truely does save you money then lets compare that $800 for 64 channels, and extension cords, and lights, etc etc. To JUST a Light-O-Rama controller....
64 Channel Starter Package
Get started! A complete 64 channel sytstem. $1,395.95
Just shy of $1400 JUST FOR THE CONTROLLER
Can you say YAY FOR DIYC =)
Check out what the Extreme Lighting Products Shop is selling!
chilloutdocdoc wrote:To show that DIY truely does save you money then lets compare that $800 for 64 channels, and extension cords, and lights, etc etc. To JUST a Light-O-Rama controller....64 Channel Starter Package
Get started! A complete 64 channel sytstem. $1,395.95Just shy of $1400 JUST FOR THE CONTROLLER
Can you say YAY FOR DIYC =)
If you have a tiny bit of soldering experience, and the time to get it running, DIY is definitely cheaper.
LOR does offer some things that you don't get DIY that some people may want to pay a premium for. Dan (the owner) is a VERY nice person, and from what i have read takes care of ALL problems a customer could have. Controllers can also be had cheaper during sales - but not as cheap as DIY prices....
Coming from the Animated Lighting side, it's a WHOLE lot cheaper... I have 256 channels now (up from 128 AL). If I were to go with AL for that amount, depending on the type of controller you wanted, and assuming that the owner was in a good mood and willing to deal a little , That would have run me close to $4000. My SS boards complete -- all the way down to enclosures, real 3 ping dongles, and 15A input cords, and other new tools that I needed to construct them -- were less than $1200.
To put it another way:
It was actually cheaper to build another 8 channel controller than it was to run the 600' of extension cord (150' * 4 channels) back to my workshop to light it up. As bonus I have 4 more channels back there!
-Mike
www.LandoLights.com
www.SequenceCenter.com --> Vixen/LOR Sequences and More
I'll never forget the look on my wife's face when I purchased my first 100 6ft. extension cords from Lowe's and then complaining that I should have bought more..lol
dhavard
days after christmas I bought 103 boxes of lights. the wife was furious, told her that when she graduates nursing school, 15 days from today, we would look into getting her a BMW when she gets a job..... HEHEHEHEHEHE
Hey you set the stage right. We will "Look" nothing said about buying or leasing.
More channels then I can use.
More light bulbs then I care count.
http://www.vimeo.com/user1106747/videos
