Renard Controller -...
 
Notifications
Clear all

Renard Controller -----Why----When -----How---?

32 Posts
15 Users
1 Reactions
11.6 K Views
Posts: 25
(@kromedge)
Eminent Member
Joined: 15 years ago
P. Short wrote:I was the one who designed the Ren64 board. Another member named wjohn took the gerbers that I provided and had the board fabricated and ran coops for the board (or outright sold it, I don't remember which). He also did some riffs on the SSR design. I haven't seen him around on this site for quite a while, it looks like his last login was six years ago.

I bought 2 of those Ren64 boards in 2011 via one of co-ops that John ran. I had just gotten them assembled and suffered a stroke in 2012 that left me with pretty much no knowledge of electronics, programming etc etc. Over the past 8 years, much of my memory has returned. I still have those 2 boards and my question is this: is there still any use for those boards seeing as everything is now led?


Reply
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

I still use my REN64 to drive a lot of LED strings. You can also use it to drive dumb pixel nodes. SMART pixels require a different controller. SMART pixels use a protocol on a data wire that runs from pixel-to-pixel to allow you to individually control them. DUMB pixels share three PWM control wires across all of the pixels in the string.

FYI: As a reminder, PWM is what the renards use to control intensity on the lights.


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 19 years ago
kromedge wrote:I bought 2 of those Ren64 boards in 2011 via one of co-ops that John ran. I had just gotten them assembled and suffered a stroke in 2012 that left me with pretty much no knowledge of electronics, programming etc etc. Over the past 8 years, much of my memory has returned. I still have those 2 boards and my question is this: is there still any use for those boards seeing as everything is now led?

The answer is - it depends. What it depends on is your taste in decorating your house and yard. The Renard controllers (along with appropriate SSRs) are still quite usable if you are happy with the appearance of either incandescent light strings, LED light strings or 'dumb' RGB strings. If your passion has turned to individually controllable pixels, then the boards are only useful for the whatever 'legacy' elements remain in your show (you don't have to change everything to 'smart' pixels at the very beginning). The Renard controllers are not very useful with 'smart' pixels because they don't support the humongous numbers of channels that pixels need and the high data rates needed for controlling those pixels.


Reply
Posts: 25
(@kromedge)
Eminent Member
Joined: 15 years ago
MikeKrebs wrote:Congratulations kromedge for making it back.

Regular string LEDs can be used with the Ren64. Do you have the SSRs to go along with the boards?

Now pixels are another thing entirely. And there is no use in the pixel world.

Thank you for your response. It’s a given that regular LED strings can be used - just not sure how well they would dim. I still have the SSR’s - sort of. I printed a dozen boards for the SSR’s myself and had gotten 4 assembled. I really didn’t think they would be of any use for pixels but thoughts I’d ask anyway because you never know when someone comes up with something that works.


Reply
Posts: 25
(@kromedge)
Eminent Member
Joined: 15 years ago
P. Short wrote:The answer is - it depends. What it depends on is your taste in decorating your house and yard. The Renard controllers (along with appropriate SSRs) are still quite usable if you are happy with the appearance of either incandescent light strings, LED light strings or 'dumb' RGB strings. If your passion has turned to individually controllable pixels, then the boards are only useful for the whatever 'legacy' elements remain in your show (you don't have to change everything to 'smart' pixels at the very beginning). The Renard controllers are not very useful with 'smart' pixels because they don't support the humongous numbers of channels that pixels need and the high data rates needed for controlling those pixels.

Thanks for the great answer Phil. I will likely use them for LED strings while I get back up to speed on pixels. There is a lot that can be done with LED strings until then. I seem to recall those discussions about pixels that were just coming onto the scene right around the time I got sick. It’s great to be back but clearly I have much catching up to do.


Reply
Page 6 / 7
Share: