kychristmas wrote:Well I guess I didn't actually answer all your questions here: http://doityourselfchristmas.com/forums/showthread.php?24179-Projected-expense&p=244665#post244665My first year was 2009. I purchaed more controllers than I needed, but with what I used. I know what I had invested. I try not to document my Hobbies in too much detail, but I went back a totaled everything up after-the-fact.
My first year I had:
3 Ren 16 Xmus ($280 including cords and enclosures)
2 Ren 24HCs ($250 including cords and enclosures)
1 Ren 64XC and 16 SSRs ($360 including cords and enclosures)Display Items
48 Channel Mega tree ($100 including PVC structure and 48 100ct Lights)
6 - 8 Channel Arches ($72 inc. 48 100ct Lights total)
10 - PVC Mini-Trees ($60 inc. 30 100ct Lights total)
4 - 6ft Midi-trees ($70 inc. 48 100ct Lights. )Misc. Items:
Pic Programmer - $60 (can be had cheaper)
Soldering Station - $32 (I actually used a cheap iron first year)
RS-485/RS-232 - $35 (I use a different setup, but this is needed)
Ethernet Cable - $80. (amount needed will depend on setup)So, my first year I had a total of 208 Channels and had an approximate total cost of $1,400 invested.
This sounds about right. I set a budget each year of 2000 and try my best to stay within it. But I do a lot of commercial led lights and now rgb, so, a nice display can be done for cheaper.
Hello Jerry,
I'm in Hessel it's about 14 miles north east of the bridge. Nice little town no one around here has anything computerized either. Mr christmas has been big news for 4 years now. Have a merry christmas nice chatting with you
I have to admit that when I first started down this road I had a set amount and put that asside for doing my lights. Once I really got into understanding where my costs were I doubled that amount and setup a seperate account just for dealing with this hobbie.
This is my first year and I found building my own boards very rewarding but I did puchase a large lot of lights and boards from someone who was getting out of for a while. I have over 200 channels but I'm only using 144. The cost estimates I have seen so far don't really add up with my numbers as I was very luck to get the deal I did. But if I had built out all those boards instead of buying them second-hand they would be accurate.
My biggest lessons in all of this is that:
1. If you think 1000' of extention wire is enough then just go ahead and get a second roll.
2. when you buy the board/bom/case there are still more costs involved, like mounting and extention cables.
3. no matter how much time you put into your sequencing it's never enough once you see it all working, even if it's incredible!
I'm just a beginner too but I crammed for the exam (Christmas) this year, don't do what I did.
All that said, I'm very happy with how things turned out for me and I have already started planning for next year. 🙂
sonic777 wrote:
My biggest lessons in all of this is that:
1. If you think 1000' of extention wire is enough then just go ahead and get a second roll.
He he, yes indeedie when that big old roll came in from WLCventures this summer I thought "Good grief!!! What on earth am I going to do with all this wire, this massive thing!" Today, I think I have about 50' feet left.
sonic777 wrote:
2. when you buy the board/bom/case there are still more costs involved, like mounting and extention cables.
I was surprised to find mounting controllers and wiring up their output lines easily takes twice as long as the soldering, though I add barrier strips to the usual configuration...
sonic777 wrote:
3. no matter how much time you put into your sequencing it's never enough once you see it all working, even if it's incredible!
Hoping this coming year that with most of the transition of my old static display to blink flashy complete, I'll have more time to sequence properly...
Hey Jerry,
I live in Hessel a small town north east of the bridge. Hope you had a great christmas and you display brought many joy
