Newbie Controller Q...
 
Notifications
Clear all

Newbie Controller Question

4 Posts
3 Users
0 Reactions
1,876 Views
Posts: 5
Topic starter
(@ellipticrecords)
Active Member
Joined: 6 years ago
[#53804]

Hi Folks
So looking to start my first show this year and am looking at around 1000 pixels to start over various props and lines on the house. Been using XLights to build the show to date and have now started to buy hardware, pixels and props to spend the year putting it all together. One area im grey on is the controller, i want to go small in the first year and was looking at a

ESP Artstick Pi Hat with Pi Zero W + SD card

https://buildalightshow.com/pixel-co...w-sd-card.html

Its seems small enough, cost is alright and it can run 1000 pixels, question is will it be ok for 5v lights? Or what other options is there, would a 4 channel Kulp be a better option?

https://kulplights.com/product/k4-pb/

What's peoples thoughts? Reason i looked at the ESP is because I'm UK based and so are the company selling so it cuts the shipping cost out as with the Kulp i would need the Beagle and the OLED display along with a card and FPP.

Thanks in advance


3 Replies
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

I would recommend a controller that has at least two ports. To get 25ms refresh rates you would need to put less than 680 pixels on a port. Most of the PI Hats would work. Not sure why an ESP would be involved when a PI with pixel hat is present to drive the pixels.


Reply
Posts: 128
(@sctwohig)
Estimable Member
Joined: 10 years ago

The main thing with starting out is you will more than likely expanding next year. With the ESP Artstick Pi Hat if/when you expand you will need to get another controller. That being said my 1st year I did something similar. I started with the falcon pi hat my 1st year along with some espixel sticks. This past year was my 4th year, my falcon pi hat is still running strong and is being used to control a mega tree (800 pixels), but I also have added 4 Kulp boards over the years, and have also added some differential receivers. I have both the 8 port and 4 port versions of his boards. I would say one of the biggest benefits of a k8, is you have 8 ports and can easily expand by adding 3 differential receivers to it, and can go even further and add an expansion board if you wanted more local ports or differential receivers. I think either of your choices will work for your needs, its just a matter of thinking to how the controller will be used in the future should be considered along with the cost savings.

Thanks,
Shawn


Reply
Posts: 5
Topic starter
(@ellipticrecords)
Active Member
Joined: 6 years ago

Thanks for the advice guys, I'm thinking to start with I will go with the K4, that should last me a couple of years at least whilst I learn more about this hobby and build on to bigger things later down the road.


Reply
Share: