Mini Trees
 
Notifications
Clear all

Mini Trees

7 Posts
7 Users
0 Reactions
3,000 Views
Posts: 14
Topic starter
(@dennis-v)
Eminent Member
Joined: 12 years ago
[#40552]

Hi Everyone
I would like to make some mini trees about 3 feet tall. I have seen tomato cages used but they do not flare out at the bottom.
I have a welder & would probably try to weld some sort of frame. I want to make them wide at the bottom to look like real Christmas trees. Any help would be welcome.


6 Replies
Posts: 486
(@uncledan)
Honorable Member
Joined: 11 years ago

You might be best starting from scratch with steel rod and making the exact dimensions you want. Copying the construction of tomato cage with your desired size. I use 42" tomato cages wrapped with chicken wire with 100 dumb rgb each. I like the proportions myself. Heres a link if interested what they look like


Reply
beeiilll
Posts: 869
(@beeiilll)
Prominent Member
Joined: 19 years ago

My first year I bought some frames from Christmas-Leds and wrapped them with some lengths of garland from the dollar store and then used 2 strands each of 70 count G-12 Leds in Red, Green, Blue, and White which I ran off 4 seperate channels of LOR.
My next year I bought a mig welder and added on 2 foot extensions to the legs so that the trees would stand taller as I can get a couple of feet of snow during the show season.

I love the look of them and get many compliments from folks who see the display but my point being is that the frames are powder coated green and hold up to the weather great.
Wasn't cheap to build them but they are a high point to the display. I am torn on tearing them down to put pixels on them but just can't bring myself to changing them as they are too good looking!

I have 6 more of the bare frames and I think that I will just make those pixels with garland (ya I still like the pine tree look - :happycrying: ) and leave my 10 mini LED trees as they are until the leds start going bad and then I will start changing those over. I am thinking of using 100 pixels per mini tree. The frames are 42" tall so that should give me a pretty good "look" with pixels.

You could always copy this design for a frame and spread the base some if you like it better.

minitrees
mt1
DSC00589

Reply
Posts: 535
(@mharnish)
Honorable Member
Joined: 12 years ago

Mine were very simple and cheap to make. I use 36" Wreath Rings for the base, PVC for the shaft, and coat hangers to string the lights on. I used 300 clear incans per tree. Here are some pics I took when I set them up.

IMG 1742 40
IMG 1743 40
IMG 1744 40

You can see them in action here:


Reply
Posts: 143
(@ndns00ner)
Estimable Member
Joined: 12 years ago

Anyone ever think about using an upside down trellis for a mini tree?

http://www.homedepot.com/p/Matthews-Four-Seasons-Heartwood-48-in-Cedar-Open-Fan-Trellis-92PG/100660240


Reply
Page 1 / 2
Share: