Wayne J wrote:I use 4" PVC 10' long, then bought a reducer to 2" to get the 12'. I made a collar to slide inside the 4" and over the 2" to make it stable. Two sets of guy wires, and it is solid! I can post more pics if you like the concept.http://www.jamesfamilychristmas.com/index.php?option=com_content&task=view&id=23&Itemid=36
Yes, please post more pictures. Good work. I check your page and like how you make controller. Very impressive !;)
2009 88 channels (add SS24), 10.000 lights, 2 collor megatree, 12 mini trees, C9, floods
2008 64 channels (grinch+ren-c), 8.000 lights 12ft megatree
http://www.ChristmasInAllen.com for photo,video and how to DIYC
vziukas wrote:Yes, please post more pictures. Good work. I check your page and like how you make controller. Very impressive !;)
Thanks. 😎
I did post a picture of the top pole with the reducer and collar in the post above. 😉
James Family Christmas - 1600 channels of SS Renard channels
Facebook - James Family Christmas
Here is another picture I just found buried up in another folder of the completed frame.
(weird... the guy wires look funny in the picture)
James Family Christmas - 1600 channels of SS Renard channels
Facebook - James Family Christmas
Wayne J wrote:Here is another picture I just found buried up in another folder of the completed frame.(weird... the guy wires look funny in the picture)
Look ok to me;) Another question tho, how do you hold the ring down? I see little post, then what?
Kevin Lang
64 Channel Olsen 595 64 Channel Grinch 4 Xmus Ren16's


Running Acer P4 3.0 GHz and 1.00GB Ram Win XP
klanger wrote:Look ok to me;) Another question tho, how do you hold the ring down? I see little post, then what?
Ahhh, now that gave me some trouble....
I made the posts first, I forget what size tubing it was, but I do remember is was "drinking water" tubing and fittings I used. It is a bit more expensive than regular PVC but the T's fit the electrical conduit perfectly for a snug fit. I cut the T's to make them slip fit over the conduit. I then drove 5/8" rod into the ground and slid the 'posts' over the rods. Once I got the ring level, I drilled through the bottom of the T through the 5/8 rod, then stuck a short piece of a metal coat hanger through the hole, like a cotter pin. This held the ring down to the ground height I set it at and makes for easy disassembly.
James Family Christmas - 1600 channels of SS Renard channels
Facebook - James Family Christmas
Wayne J wrote:Ahhh, now that gave me some trouble....
I made the posts first, I forget what size tubing it was, but I do remember is was "drinking water" tubing and fittings I used. It is a bit more expensive than regular PVC but the T's fit the electrical conduit perfectly for a snug fit. I cut the T's to make them slip fit over the conduit. I then drove 5/8" rod into the ground and slid the 'posts' over the rods. Once I got the ring level, I drilled through the bottom of the T through the 5/8 rod, then stuck a short piece of a metal coat hanger through the hole, like a cotter pin. This held the ring down to the ground height I set it at and makes for easy disassembly.
Now that is quite ingenius and gives me ideas to change my plans as I was gonna use rebar. That will never do if I'm gonna need to drill holes. Thanks Wayne!

