I purchased 5 (1 spare) 5mm 32x64 LED matrixes. I might go to a larger display and/or higher density. I did look for controllers before but lost the links. After doing another search I could only find Raspberry Pi solutions which from my recollection of my past search was more difficult. There was some other solution, though that one wasn't exactly cheap. I could be wrong but I thought that other solution also comes with the appropriate connectors for the LED matrix boards.
This is nice it combines FPP and the controller together. https://www.pixelcontroller.com/store/controllers/47-falcon-picap.html
Ah, BBB is the one I looked at before. $60 is also the price that I thought they are running for. I think I was preferring the black over the green. But I think this is just the controller and you still need power to the matrix. I need to research this more.
I am not quite sure what this PiCap is for. It looks like just a "regular" string light controller. I think the LED matrix are not 2811 but just simple LEDs with line drivers. I could be wrong, though.
Linsn has quite a lot of different products. But it looks like something that goes into a PC and/or needs some Ethernet connection. I am looking for a controller that I can put into the same box where the LED matrixes are located.
look at the p5 controller
[/SIGPIC]
2026 - Four more 3d printed singing faces, vertical strips for the arches, 2 new 24px24p matrix signs for the sides of the yard.
2025 - Added two 3d Printed singing light bulbs, Added Stars on top of mid and mini trees
2024 - Prop rebuilds
https://www.youtube.com/user/MartinMueller2003
This will help you out if the Rpi is in your mix =>
