I need help!
 
Notifications
Clear all

I need help!

4 Posts
3 Users
0 Reactions
1,642 Views
Posts: 2
Topic starter
(@r0enin)
New Member
Joined: 8 years ago
[#49697]

I am a newb at all this, so don’t laugh when I tell you what my problem is. I haven’t hung Christmas lights in a few years. My little girls asked me to hang lights this year so we went to Lowe’s and I let them pick the lights they liked.

So we go GE Color Effects C9 lights. They said you could connect up to 6 so we got 6. I hung the lights on the house which took most of a day, plugged them in and they are all different colors one string doesn’t even work. I thought they would all be the same color to start and I would be able to change the settings with one remote and that would change all 6 strings plugged end to end. How do I get these things to work on the same color or effect at the same time!? This driving me nuts, they make you think you just plug them in and go...NOT.

Sent from my iPhone using Tapatalk Pro


3 Replies
Posts: 740
(@ezellner)
Prominent Member
Joined: 11 years ago
R0ENIN wrote:I am a newb at all this, so don’t laugh when I tell you what my problem is. I haven’t hung Christmas lights in a few years. My little girls asked me to hang lights this year so we went to Lowe’s and I let them pick the lights they liked.

So we go GE Color Effects C9 lights. They said you could connect up to 6 so we got 6. I hung the lights on the house which took most of a day, plugged them in and they are all different colors one string doesn’t even work. I thought they would all be the same color to start and I would be able to change the settings with one remote and that would change all 6 strings plugged end to end. How do I get these things to work on the same color or effect at the same time!? This driving me nuts, they make you think you just plug them in and go...NOT.

Sent from my iPhone using Tapatalk Pro

Attached is a link to the instructions. It says you need to preset each string before you plug them together. https://fccid.io/YLI720002011A/User-Manual/User-Manual-1455413


Reply
Posts: 691
(@stormyblade)
Honorable Member
Joined: 12 years ago

Something to ponder: over the years, many here on this site have been frustrated at the performance of the GECE family of lights. Years ago these style of lights shipped with a small radio remote to control the lights, but they never stayed in sync as they all used separate timing chips that were poor. Then GE came out with ones that connected to your phone via Bluetooth, but again, keeping them in sync was impossible. Now for some sets there's just an app to control them, but still the problem persists of keeping them in sync while controlling them all at the same time.

Most here that still use the GECE lights have cut off the controller and plugged the string (after you do some wire splicing) into controller devices, such as the Falcon or SanDevices, and used them in their shows. For now, I'd just try to follow the above instructions and see how well they work for you, but know that you aren't the only one that's been frustrated over the years.


Reply
Posts: 2
Topic starter
(@r0enin)
New Member
Joined: 8 years ago

Thanks for the replies guys, I went back and set them then plugged them in. I can’t change the color or mode without screwing up a string, because the receivers aren’t close enough together. They are up and all the same setting, and the kids are happy!

Sent from my iPhone using Tapatalk Pro


Reply
Share: