Getting started
 
Notifications
Clear all

Getting started

82 Posts
9 Users
0 Reactions
19.2 K Views
MartinMueller2003
(@martinmueller2003)
Posts: 7615
Illustrious Member
 

You can see a list in the Wiki. I have The following and like them all:

PX1 - Drives up to 250 pixels and gets its data via the Renard Protocol. Great starter controller/
ESPixelStick - My version supports approx 300 pixels. Uses E1.31 over WiFi
PI Pixel + RonP PI hat - Handles 800 pixels (others have had more) without issue
F16v1/2/3 (I have all three versions): Thousands of pixels over E1.31

Other people use the E682 and similar controllers. I have no experience with these so I cannot Comment on them.

There are more (Alphapix comes to mind) and the list goes on.

At the moment I am traveling so I cannot send a photo. All of the ones I have mentioned have pictures on various web sites. My first pixel oriented show used 20 PX1s but has since grown significantly and moved to the F16 series controllers as the primary controller.


[/SIGPIC]
2026 - Four more 3d printed singing faces, vertical strips for the arches, 2 new 24px24p matrix signs for the sides of the yard.
2025 - Added two 3d Printed singing light bulbs, Added Stars on top of mid and mini trees
2024 - Prop rebuilds
https://www.youtube.com/user/MartinMueller2003

 
Posted : 19/08/2017 7:32 pm
MartinMueller2003
(@martinmueller2003)
Posts: 7615
Illustrious Member
 
Lamar bolen wrote:I have a DMX controller could I cut one of my cables and run them that way

Sent from my SM-N910T using Tapatalk

DMX is the protocol to deliver the data to the controller for a light or string of lights. If the controller can take DMX in and output WS2811 then you can use it to drive pixels. If not, the maybe dumb strings.


[/SIGPIC]
2026 - Four more 3d printed singing faces, vertical strips for the arches, 2 new 24px24p matrix signs for the sides of the yard.
2025 - Added two 3d Printed singing light bulbs, Added Stars on top of mid and mini trees
2024 - Prop rebuilds
https://www.youtube.com/user/MartinMueller2003

 
Posted : 19/08/2017 7:36 pm
(@lamar-bolen)
Posts: 283
Reputable Member
Topic starter
 

Those lights was basically a trial just me messing around with stuff but I got the wrong RF controller..but I have a pi 3 comming

Sent from my SM-N910T using Tapatalk


 
Posted : 19/08/2017 8:31 pm
(@lamar-bolen)
Posts: 283
Reputable Member
Topic starter
 

And a falcon pi cap

Sent from my SM-N910T using Tapatalk


 
Posted : 19/08/2017 8:32 pm
(@lamar-bolen)
Posts: 283
Reputable Member
Topic starter
 

It's the lights and everything else

Sent from my SM-N910T using Tapatalk


 
Posted : 19/08/2017 8:33 pm
(@lamar-bolen)
Posts: 283
Reputable Member
Topic starter
 

And the falcon

Sent from my SM-N910T using Tapatalk


 
Posted : 19/08/2017 8:35 pm
(@lamar-bolen)
Posts: 283
Reputable Member
Topic starter
 

Thanks for the info

Sent from my SM-N910T using Tapatalk


 
Posted : 19/08/2017 9:41 pm
Page 6 / 6
Share: