I have gotten pretty much everything up, but have a few questions on tieing things together for channels. A quick run down of what is currently in the picture and the basic plan. The house each side of the main peak and the the porch peak each have their own strands of lights along with each side running up and down of the house and porch have their own. I was going to tie each of the four sections together peak to porch. The tree has 8 channels. I am debating on the star depending on final channel usage. The bushes are large and took 2 bush light sets I was hoping to use one channel each bush if possible. Each Window has its own set of lights and I was going to tie in hanging light up Window pieces into each. The door also has its own set of lights. Each set of candy canes down the path are together and would take two channels and the 4 mini trees are currently separate, but I'm hoping to tie 1 and 4 and 2 and 3 together to use only two channels. The gift boxes in the picture are static. Any recommendations are appreciated. I also have a lot of mini and c7 lights not used if you think it would look good static somewhere.
Also Santa is static and any lights I've used are single 100 incans
How many available channels do you have?
What I did for my house was draw on the photo using a convenient drawing software (even MS paint will do) to be able to better visualize what I have to work with. If I read your post correctly, each line/circle is a channel. I have the main peak of your house separated into two strings/channels, or are they interconnected?
I would definitely put the star on it's own channel. Mine is, and I found that I've used it by itself without the megatree underneath for certain sequences.
That's a good idea using paint. The house has four separate stings as you have it along with the front porch. I'd like to tie them together and use 4 channels. My main concern are if one channel can handle two two sets of bush lights and to see if my idea of tieing my mini trees to two channels would look good or if I should take away some where else to offer 1 channel each. I the star was one of those possible use on a channel or static.
Each channel of the SS16 and SS24 Renards can handle 2 amps.
The math here is easy - take the sum of the light wattage off the tags of the strings you want to wire together onto one channel, and divide by the voltage (120 V for US) and that gives you the amperage.
Let's say your bushes have two light strings that are 40 Watts, each:
160 watts / 120 volts = 1.3333 amps.
1.3333 amps is less than 2 amps so you could wire the four bush strings together on one SS16 or SS24 channel in this made up example.
Each half of the renard can handle 10 amps. That's why those two models of Renards have two power cords - one for each half of the controller. So having 24 two-amp channels is great, but each half (bank of 12 channels) can only handle 10 amps.
Also, if you plug both halves of the Renard into the same outlet, you're now limited by the breaker on that outlet - that's likely to be 15 amps (1800 watts).
I actually power all my lights (120 channels worth on five Renard SS24's) off a single 15 amp outlet - I'm able to do that because when I sequenced, I made sure everything isn't on at the same time and thus, I never draw more than 9.97 amps on the 15 amp circuit.
Like so:


