I have a CG-1500 enclosure and some additional ones being shipped. But I am looking at the mounting holes and wondering what the screw size is.
I'm hoping one screw is universal for all boxes.
Thanks
Buddy
Are you referring to the external mounting bosses or the internal ones?.
The internal ones are indeed consistent, but they are designed in a way that several sheet metal screws sizes will work. I typically use a #6, but you can get away with a long #4. You can even cram a #8 in there, but I reserve that for stripped out locations.
Externally I use a #8, short enough to keep from breaking through on the configurations that have external bosses.
Does this help?
I have blank plates listed on "buy, sell, trade" http://doityourselfchristmas.com/forums/showthread.php?40424-Blank-Adapter-plates-for-CG-1500
Thanks Alex!
#8
I don't have but a few controllers so I am sure #8 will be all I need.
Buddy
UBotBuddy wrote:Thanks Alex!#8
I don't have but a few controllers so I am sure #8 will be all I need.
Buddy
Update! I built a few enclosures yesterday and noted I was off by a notch. I updated my post above, I use #6 typically. But I keep a range from #2 to #10 on hand because I always need different sizes and lengths. :biggrin:

