In looking at this thread http://www.doityourselfchristmas.com/forums/showthread.php?t=4766 and going to Lowes website and checking them out, they appear to be indoor light duty cords. Fortunately/unfortunately for me, I'm not the electrical person in my house, my wife is a lighting designer and is excited to help me but she has an electrical background and is against me using these outdoors. Is she right to be concerned or is she being over cautious. From what I've gathered most of the people here have safety in mind and I've seen others use similar cords and no one seems to be alarmed.
It seems like a good deal but I'd rather not destroy anything. If anyone could offer an explanation to appease her and explain it to a simple man, I'd appreciate it.
I'm sure I've opened myself up to comments, and I trust me it sucks having to check with my wife to see if I'm doing things right but at least we have something to talk about now.
Thanks.
Sean
well, a plummers house is never plum.... I use the indoor cords on the exterior, but my entire display is protected by GFCI outlets (pain in the tail during rain) . At the 500mA differential or so that the outlets trip at, I am not afraid of my extension cords failing being an issue. If you or your wife are in doubt, the best answer is 'don't burn your house down'.
Yes, those are rated as indoor us only. The reason for this is that there is no ultra-violet inhibitor in the isolation.
That being said, there is a huge majority that uses these outside. This includes the SPT-1 & SPT-2 wire that they’re made of. 16 gauge is 16 gauge, whether it rated for indoor or outdoor makes no difference.
Without the UV inhibitor, the insulation can develop small cracks. I understand that some people have cords that are over 10 years old. I also understand that some people are finding that they need to pitch some of the cords after six years. You should be inspecting all of your cords anyway, whether they’re new or old.
I live in Minnesota and the below zero temperatures cause more damage to my cords than the short term exposure to UV. About half of my cords are covered with snow, but the other half isn’t. So far in the four years that I’ve been using them, I haven’t seen a single problem. My first year, these were the only cords that I used, because they were so cheap.
I just bought 90 green cords from Home Depot. They were close outs from last year that I only paid $.31. This is what I use for powering my controllers an all of my SSR’s.
Watch your current use, don’t over load anything and use CFCI’s.
Edit: BTW, CFCI's trip 5mA, not 500mA.
A mediocre person tells. A good person explains. A superior person demonstrates. A great person inspires others to see for themselves.
IMO the reason most of them have been able to use them over ten + years is you only have them out for a month or so... and the days are much shorter... the amount of UV damage is reduced when totally overcast... Etc...
They are just fine for outdoor use if you do as Ernie says and don't overload them.
Jeff
2023 Blinky Bound
Don't overload them if you are using them indoors either.
1 channel, 0 dimmable. Powered by a man flicking a lightswitch to the beat.
Thanks to all for your help and for not abusing me. I have since found a few other posts echoing the sentiment. Sorry for not looking around more as I should've guessed the question had been answered. Wow has this been a learning experience!
