controller to first...
 
Notifications
Clear all

controller to first pixel

8 Posts
6 Users
0 Reactions
2,648 Views
Posts: 3
 vila
Topic starter
(@vila)
Active Member
Joined: 5 years ago
[#55394]

Hi guys, I'm new to this and I'm looking at setting up lights on my roofline and was wonder what is the max length I can run my cable from the controller to the first pixel. I have about 25ft from the garage to the first pixel on the roof line. Is this an excerptible length? I have attached a photo of the layout if it helps.

house control box layout0.5x

7 Replies
Posts: 344
 TSL
(@tsl)
Reputable Member
Joined: 10 years ago

I have several 20’-25’ runs from controller to first pixel, never had issues.

Sent from my iPhone using Tapatalk


Reply
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

25' using a reasonable quality cable (aka not speaker wire or zip cord) with power injection at the first pixel is not very far at all. Worst case would be adding a buffer/driver at the 15' point inline with the data and V- wires.


Reply
Posts: 409
(@dim-bulb)
Reputable Member
Joined: 9 years ago

I have a run that is 20' from the controller, it has 285 pixels at 30%, i had to inject at the end. I have another run of 300 pixels that use only on a 3' cable and no power injection.


Reply
Posts: 1420
(@1pet2-9)
Noble Member
Joined: 6 years ago

There are YouTube videos of people testing this. You can run the same tests they do indoors; it is easy to test. I run standard 3-channel 22awg wire for about 21 feet and it doesn't even start to have issues. The best YT video I saw, he ran 18awg over xconnect and started to fail between 30-40 feet unamplified.


Reply
Page 1 / 2
Share: