It depends...
1. At my home we use a modified approach. An F16 drives the megatree along with 4 remotes pushing the "border props" (garland and north poles and several other smaller props). A couple of E682s and a couple of F4V3s run additional props, and we even still use a DIYLEDExpress E131 bridge with 5 remotes for stuff up on the house ridges.
2. At the park, we use a controller per larger prop. This means each mega-tree has their own controller, the castle is in three main parts and has a controller for each part pushing the props on each section. Other main groupings around the display area have their own controllers.
Of course all the separated items in the park have their own controllers and usually their own RPi running FPP.
The reasons for the above are simple: The house gets setup each year with only minor changes. The park changes drastically every year.
In both cases, the controller or remote is sized to the needs of the situation.
Figure out WHAT you're going to run and then figure out HOW to run it. Lay out your props and figure out what works best for power and data. Bwinter is spot on about cables. I've gone many ways over the last several years, and I'm still changing the controller lineup based on what props are being added.
Kensington wrote:Figure out WHAT you're going to run and then figure out HOW to run it. Lay out your props and figure out what works best for power and data. Bwinter is spot on about cables. I've gone many ways over the last several years, and I'm still changing the controller lineup based on what props are being added.
+1 Couldn't agree with you more! Step one is figuring out the display. I have 8 Falcons, (3)F16v3 and (5)F4v3 with expansion boards, differential expansion boards and receivers. Figure out the display and pick the controller(s). F48 does nothing for me personally. With a 1/4 acre lot I would imagine it probably isn't the best fit for your needs either. Don't overlook the F4v3.
I am a fan of smaller controllers using FPP with master and remotes. I have the master in the basement and four remotes in the yard f16V3 for a pixel tree, F4V3 left side of driveway, F4V3 Right side of drive and F8-PB on rooftop
Thanks for the feedback, I appreciate all of the insight. There are things I haven't considered since I have never done this before. It's already mid January, I've got to get this stuff figured out!! :biggrin2:
