Hi everyone,
I am considering trying a light show this holiday. I just started looking into it tonight. Does anyone recommend a certain design that would be best for a beginner? The method where you just hook up relays to the parallel port seems pretty simple, but you can only have 12 channels. Is this fine to begin?
The grinch method seems like it would be good too, but I don't understand how it works. the only info i could find explaining it was just a very top level description on the wiki page for it. is there more info elsewhere?
if i were to use the method with just the parallel port, i just connect one pin of the port to each relay? which relays are best for this? does each relay need its own outlet, or can i use a 6 port extension cord and fill all those with cords going to relays?
in the vixen program, the program is essentially going to be setting pin values at certain times corresponding to music? or is it more complicated.
thanks
Hi and welcome to the DIYC forum. As a beginner myself, I would recommend one of the Renard SS series boards as a starting point. The boards you mention are great boards as well, as I'm sure the other members who use them will tell you.
This will be my first year in the blinky flashy realm, and I first went with 2 - Renard 24SS boards (48 total channels), I have since purchased a Ren64XC and floods since then, throughout the year (DIYC bug I caught since joining this forum). I have read in the forums that a good first show can be done with 16 channels. A Renard 16SS is a good choice. Several different empty boards can be bought through WayneJ, just PM him or check out this post http://doityourselfchristmas.com/forums/showthread.php?6663-The-Renard-SS-16-is-now-available!-(first-post-is-current-10-14-2011) . You will have to buy the components from mouser.com or other electronics house. And other misc options (extension cords, Cat5 cable, a USB to Rs-485 adapter, a PicKit2 or 3 to program the PIC, an enclosure for it all to fit in, and a FM transmitter), it depends on if your have some stuff already around the house. And of course lights.
Vixen, as I am learning is somewhat easy to use. The Wiki has a tutorial on installing and using it. But I have yet to finish one song.
-Bert
Welcome to DIYC! This is also my first year. I agree with Bert, a Renard SS series board (8, 16 or 24) channel seems like a great place to start. The boards are available year round if you check the "group buy" forum, I believe Wayne carries them. You can download a Bill of Materials (BOM) from the Wiki, order from someplace like Mouser.com and assemble the board with fantastic step-by-step instructions.
Buy some type of communication dongle (such as the popular USB-RS485) on Ebay and download Vixen and you're ready to go.
You have full dimming and switching capability on these boards for 110V. Vixen is relatively easy to learn, check out the training videos on YouTube and you're off to the races.
A word of caution though, you're getting in a bit late for this year, so I'd be prepared to spend some time learning on the Wiki, reading the many great posts on this forum, and asking questions. DIY is the essence of this forum. It's encouraged (and required in many cases) and can be very time consuming. But the great part is you aren't alone. This forum is full of VERY knowledgeable people who are happy to answer any questions. The chat room is also a great place for some quick advice on an evening. This is a great place to learn, experiment and enjoy lighting up Christmas in to bring some happiness to us and our neighborhood in celebration of our Lord's birth.
Best Regards,
Alex
Welcome to the forum, Advice...Well I began last May (2010) sculpting my display, and this year is going to be my unveiling. I'd recommend this year going small, try your hands at building a megatree (perfect your technique for next years unveiling! Build a base, topper, etc.) maybe some window frames, mini-trees, and make them static or similar. Then on the 26th of December head off to Walmart (or similar retailer) EARLY to purchase lights at half price. When buying lights, expect at least 1 string of lights per channel, (Grinch fully populated 64 channels, 64 strings of lights +5 spares). Then throughout next year participate in group buys where you can get boards, bills of materials, FM transmitter, antenna, for much cheaper than you can on your own. Begin now sequencing in Vixen, become familiar with it, design your display and build off from there.
The single most valuble thing is the WIKI page. Read it, and become really familiar with it. The forum is also great for querying searches and finding keywords that will help you learn the lingo and become fluent in DIYC. Remember, Christmas comes every year, don't get discouraged early on with pressures to build a killer display, plan small this year, and spend the next 8-10 months planning for an EPIC display next year.
When you decide to buy controllers, I'm running 3 RenSS24 and love them, the entire SS (Standardized Series) boards are brute-force GREAT controllers and come in 8, 16 and 24 channels. For a high count controller, I'd recommend what I know and that is the Ren64, easy build, and works well. It runs either common SSR's (Solid State Relay's) the SSRneon and SSRez (both are great choices), like the grinch, but the Ren64 has FULL dimming capabilities (not a must but becoming the industry standard).
You discussed the direct attach method, this can be used with many types of relays, "puck style" relays will work though they are expensive. I've discussed it before but the KIT74 isn't a bad method to use for a first time display, It's a simple relay board that vixen can control. If you’re crafty and have the time, you may be able to use one this year for a megatree to add some pizzazz to your static display!
Don't let it overwhelm you, just be a minion and absorb everything you can, there is a HUGE knowledge base here and a willingness to help newbies!
Welcome to DIYC. We always request that you put your location in your profile so that we know where you are. That way if someone is close, it can be a lot easier to help you face-to-face. This is especially important when you are a little behind. (Believe it or not you are cutting it very close.)
If you want to attempt to build something, I would go ahead and purchase the Board(s) and purchase the BOM. Your other option is to watch out for pre-built boards that are sale. In any case, one way to get going now is to download Vixen from Vixenlights.com and start playing with it.
The other post have already covered the other items.
As it has been said before, Welcome to DIYC. One other thing that I have found that is really important, PLANNING. You really have to plan out what you want to do with your display before you start buying hardware. Its very simple, just take a picture of your house, print it out, and draw on it what you would like to do. Next count the number of channels it will take, and then see what hardware will work the best. I started out my first year with the Grinch controllers, because I knew it would grow. My second year I changed everything to the REN64XC's. I also went that direction because the SSR's could be used on either controller.
Another thing to think about, where do I want to put the controller? And how much Cat 5 do I want to run. Again my first year I used a lot of Cat 5, but my second year, (last year) I went totally wireless. Once the Ren-w came out, and it worked with both the Grinch and the REN64XC, I changed my entire setup to wireless. It truly made setup a lot easier.
My recommendation, Plan out what you want to do, Ask questions on what hardware you want to use, build it up, and start having fun.
Two more things, on this forum, there is no such thing as a dumb question. So please feel free to ask. And the last thing, be prepared to get sucked into this hobby. Once it is under your skin, it is really hard to get off. I think we are all addicted to blink-flashy here.
Good luck, have fun, and enjoy.
Welcome aboard.......my input is to go small this year. I started in Feb. and I'm pushing to get finished so I can set-up and do final checks.Istarted with 16 channels and I'm
already up to 144 its amazing how this grows.
All my display are incandesent lighting, I now know I will be going to LED for next year. So if its in your budget you may want to just start with LED.
Also make sure your wife is on board with this,I'm lucky mine is $$$$$$$$$.And time I still cant beleive how much time I have spent on this hobby
this year.
The last thing is you cant find a better bunch of people then on this site.
Congrats,have fun.
Traneman wrote:Welcome aboard.......my input is to go small this year. I started in Feb. and I'm pushing to get finished so I can set-up and do final checks.Istarted with 16 channels and I'm
already up to 144 its amazing how this grows.
All my display are incandesent lighting, I now know I will be going to LED for next year. So if its in your budget you may want to just start with LED.
Also make sure your wife is on board with this,I'm lucky mine is $$$$$$$$$.And time I still cant beleive how much time I have spent on this hobby
this year.
The last thing is you cant find a better bunch of people then on this site.
Congrats,have fun.
haha, no wife yet. i'm only 21. my parents should be fine with it though.
is there any setup that doesn't require buying a board? I'm a EE major and would enjoy building something if its not too entirely difficult.
why are all of hte setups using Cat-5 cable? do you guys split the 8 wires and put each to its own relay?
There are some Home-Etch files in the Library. Check them out. Is that what you mean?
http://doityourselfchristmas.com/forums/dynamics/browsecategory.php?catid=8
The Simple 16 on Page 2 is probably the quickest bet. You will need one of the SSR designs as well if you go that route.
i don't know anything about PCB's, but I didn't know if there was a certain design that could be implemented using digital logic gates and a breadboard or something like that.
how much does a renard cost? where do you get one?
