Notifications
Clear all

Wireless SSR

14 Posts
8 Users
0 Reactions
25.9 K Views
Posts: 555
Topic starter
(@zaker)
Honorable Member
Joined: 19 years ago

It's for the Onestick http://digwdf.org/store/attachment.php?id_attachment=50


Reply
Barnabybear
Posts: 1583
(@barnabybear)
Noble Member
Joined: 15 years ago
zaker wrote:Does anyone make/have plans/kit of a 4 channel wireless SSR? hopefully using an ESP8266? I have one location with 4 sets of AC lights, have power close enough, but awkward to get a cable to. I though I saw someone mention one, but can't find it now.

Thanks for any info

tom

Hi, this worked ok for me but I've not done much with it since.

http://doityourselfchristmas.com/forums/showthread.php?46534-Anyone-want-to-help-testing-an-ESP-adapter-for-AC-SSRs-DC-to-follow


Reply
Posts: 1420
(@1pet2-9)
Noble Member
Joined: 6 years ago

I assume the OP question is, "does anyone make wireless 4-channel SSR kits *that I could use*?" I DIY 4-channel SSR contraptions fairly regularly, but I don't particularly market them or make them available.

Depending on your needs, you might want to consider my favorite RFM69 Arduino Uno shields instead of ESP8266: https://www.elecrow.com/rfm69-shield.html

It's a big Arduino Uno form factor, and it's definitely non-standard (frankly, I'm the only one I know who uses them...), but I have been far happier with the wireless than I have with any 2.4Ghz wireless (this runs more-or-less on 315MHz). Good outdoor range, good response, and you're writing Arduino sketches right down at the lowest level. No OS, no TCP/IP stack to speak of. You tell the Arduino when to send and when to read (or to dequeue a signal it already received). People probably remote-control cars and airplanes with these things. You still have to wire out your own SSR's, but a lot of the NodeMCU software stuff other people have to deal with, you don't. You also don't have to deal with a lot of the level-shifting stuff others do, since this runs directly on a 5V Arduino. I run big 40A SSR's directly. I'm in love with them, and my wife feels threatened.


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

DIGWDF made the FourStick, OneStick and also a real workhorse called the MiniRen8/4XB. That was essentially a heavy-duty, 4-channel wireless SSR.

Just FYI, the Gerbers and DipTrace design files are purchasable at reasonable prices from the DIGWDF Store. Here's the page of instructions for how to get them.
You can buy one, two, five, or even all 80+ of them for $69.95.

http://digwdf.org/store/category.php?id_category=27


Reply
Posts: 555
Topic starter
(@zaker)
Honorable Member
Joined: 19 years ago

I could get into a lot of trouble buying the Gerbers, lots of neat stuff at digwdr store! Thanks for the info.


Reply
Page 2 / 3
Share: