Notifications
Clear all

Coro or Frame

5 Posts
5 Users
0 Reactions
12.6 K Views
MindTrik
Posts: 1542
Topic starter
(@mindtrik)
Noble Member
Joined: 16 years ago
[#29717]

and why...looking to add a 4' animated pumpkin this year...just looking for opinions on whats best. This will hang from the peak of my house...so if its corrugated I have to use it in a frame to hang...


4 Replies
Posts: 67
(@torque)
Trusted Member
Joined: 14 years ago

Personally, I like the framed coro idea, mine are similar, although I hand- drilled a plastic substrate, rather than buying pre-punched coro. Why? Well, all my lights are hotglued into their holes, so all the lights are uniform in direction (head on to the tips from viewing angle). I feel this helps to define the "lines" that are drawn by the lighting channels. When researching ahead of time, I just didn't see where a wireframe would give me the definition and uniform spacing I was looking for. Also, from past experiences, I have noted that wrapping a string of lights around my wrought iron railings always seems to knock several loose or even make several not work after being dragged through the railing multiple times. My faces are also under the roofline by a few feet, so they are not susceptible to rain, unless it's the horizontal kind. All 4 monsters are easily put up and taken down and put into storage each year, and the 2X6 framing around them also helps to protect the lamps while being stored. Sorry I don't have detailed photos of my setup, I may add some insight later this summer with close up shots of how mine were built.


Reply
Johnfish211
Posts: 404
(@johnfish211)
Reputable Member
Joined: 14 years ago

http://doityourselfchristmas.com/forums/showthread.php?28574-1st-Halloween-Videos-2013

This is a link to videos of my 4 ft coro pumpkin from haloween 2013. It is in a ply wood frame. The pumpkin is from holiday coro and is really well designed. It is set up for pixels but they also sell one for mini lights. Mine was on the ground but I have seen them mounted on the house also.

John


Reply
Posts: 2039
(@dougp)
Noble Member
Joined: 17 years ago

If you want one made out of steel, thake a look at my site.


Reply
Posts: 1744
(@tjetzer)
Noble Member
Joined: 18 years ago

You can't beat Doug's frames. I'm a big fan.


Reply
Share: