SparkFun Oven Contr...
 
Notifications
Clear all

SparkFun Oven Controller

24 Posts
7 Users
0 Reactions
10.1 K Views
budude
Posts: 10400
Topic starter
(@budude)
Illustrious Member
Joined: 18 years ago
[#11908]

I mentioned in another thread that I had just received and built my SparkFun Oven controller as well getting a Black&Decker Toaster Oven from Walmart. I mounted the controller on the back of a PVC duplex box and the oven ran from a plug on the front of the box. The temp sensor probe ran through he door opening and I threaded it through the tray. I ran through a couple cycles of the default program on the controller and it ran pretty close to the projected values.

The oven has 2 upper and 2 lower elements and heats up pretty quick. I set it with max temp (goes up to 230degC), convection/bake, and constant on on the controls of the oven.

Can't wait to try it on some boards now - just have to get some of the solder paste.


23 Replies
Matt_Edwards
Posts: 2664
(@matt-edwards)
Famed Member
Joined: 18 years ago

Show Off! Hee hee.

That looks good. Can't wait to see the results. SMD is really easy.


Reply
budude
Posts: 10400
Topic starter
(@budude)
Illustrious Member
Joined: 18 years ago
Matt_Edwards wrote:Show Off! Hee hee.

That looks good. Can't wait to see the results. SMD is really easy.

Thanks - you know though - I think the DIY community here could come with a cheaper alternative to the SF controller - especially considering the actual controller code is 3rd party anyway! Their controller is pretty easy to build and it's a good design - but the "science" behind doing the control is really pretty simple - read a probe and change an output based on the probe input. Heck - many PICs have ADC inputs - seems like that could be used for this.

Anyway - I'm pretty happy with it - I plan to use a platform of blank FR4 (no copper) for the tray liners with a bunch of holes drilled in it to hold the parts. Obviously the FR4 can stand up to the heat just fine already.

I've seen a post here and there but can someone suggest a good solder paste (and dispenser) for this kind of work?


Reply
Matt_Edwards
Posts: 2664
(@matt-edwards)
Famed Member
Joined: 18 years ago
budude wrote:Thanks - you know though - I think the DIY community here could come with a cheaper alternative to the SF controller - especially considering the actual controller code is 3rd party anyway! Their controller is pretty easy to build and it's a good design - but the "science" behind doing the control is really pretty simple - read a probe and change an output based on the probe input. Heck - many PICs have ADC inputs - seems like that could be used for this.

Sorry I can't help you with the solder paste as I buy mine locally

I also agree with you about the controller. Not sure if I agree about the ADC as you will need a way of calibrating each sensor, and there are Cold Junctions, hot junction issues to be dealt with.
Nah I see myself using a MAX 6675 being used to simplify the design. 12bit representation pretty linear with Temp - that makes life easy. the real only issue is to keep the chip away from the oven. That should be too hard.


Reply
David_AVD
Posts: 991
(@david-avd)
Noble Member
Joined: 17 years ago

Maybe use that chip with one of these thermocouples?


Reply
Page 1 / 5
Share: