New window frames
 
Notifications
Clear all

New window frames

20 Posts
10 Users
0 Reactions
5,930 Views
Posts: 138
Topic starter
(@jeffro)
Estimable Member
Joined: 16 years ago

Yeah, the angle brackets make a huge difference. Plus, I'm using the small corner brackets that pull the corners flush (because it would take a Christmas miracle for any 1x3 to actually be straight).


Reply
Posts: 138
Topic starter
(@jeffro)
Estimable Member
Joined: 16 years ago

Those look great, it appears we're using a lot of the same hardware as well.


Reply
Posts: 494
(@tlorek)
Honorable Member
Joined: 18 years ago

Looking good! I went a slightly simpler route, PVC and ropelight and then conduit hangers to hold them in place.


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

Yeah - I had PVC with wraps but I did not glue the PVC together so I could store it easier - the whole thing was a floppy mess with 30 strings of lights (CDI 5mm) on it. It looked nice when it was up and running but like I said, no fun to put up.

WindowFrame

Reply
dirknerkle
Posts: 10311
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

I initially made these PVC frames when we built the house 20 years ago. They're 1" pvc and have been painted black once or twice, but otherwise no breakage whatsoever. They've been restrung multiple times and have had anywhere from 200-500 mini-lights on each one; this past spring I replaced them all with 400 M5 LEDs on each window. Since the house is white and the shutters black, from the street these really blend in and you hardly notice they're even there.

It takes about 1 or 2 minutes per window to hang them, most of the time is spent carrying them from the garage. Hanging is a piece of cake: I fashioned an aluminum bracket that slides over and behind the shutters; fasten them to the shutters at the bottoms with a couple zip ties and you're done.

This year, each frame is a totally self-contained display unit. Each has its own wireless MiniRen8/4XB controller mounted in a small Carlon box attached to the frame, and each is already wired and start addresses preset. Hang them, drop a single SPT-1 wire down to the ground from each one, plug them into A/C power and they're ready to roll. With the M5 LED strings, I'm hoping that the color won't wash out or flake off, which usually happens with mini-lights.

hung1
fasten1
bracket2
bracket3
hung4

Reply
Posts: 2128
(@livermore-dad)
Famed Member
Joined: 16 years ago

ahh yes.. If I didn't break them down it would be "almost" as easy as you state (and you better have everything self contained, with all of your cool boards!!: ))).

And I'm in similar boat as Brian


Reply
Posts: 216
(@dunnsr)
Reputable Member
Joined: 16 years ago
budude wrote:I went a similar route using 1x3 boards as well. I will be mounting an 1809 pixel strip around the entire frame to replace my bulky PVC/wrapped contraption I have now which is no fun at all to put up. This should be a breeze!

nice patio Brian I mean nice frame!


Reply
WakeFan
Posts: 733
(@wakefan)
Prominent Member
Joined: 19 years ago

I used vinyl PVC boards(looks like wood 1" x 6" but made of vinyl) for roofline and windows. I ripped them to 1x3 and drilled a lot of holes.

http://doityourselfchristmas.com/forums/showthread.php?5357-Roof-Lights&p=49444#post49444


Reply
Posts: 138
Topic starter
(@jeffro)
Estimable Member
Joined: 16 years ago
WakeFan wrote:I used vinyl PVC boards(looks like wood 1" x 6" but made of vinyl) for roofline and windows. I ripped them to 1x3 and drilled a lot of holes.

http://doityourselfchristmas.com/forums/showthread.php?5357-Roof-Lights&p=49444#post49444

Great job with those, your hard work paid off. I'm a big proponent of lights that are neat and straight. Plus, with the vinyl PVC basis, you're in good shape for dealing with the weather. How's the strength of the boards?


Reply
WakeFan
Posts: 733
(@wakefan)
Prominent Member
Joined: 19 years ago

I used 5/4" which is a true 1" which I thought at time was a pain, but it gives me a little extra strength. They bend, but so far none has broke. I am not gentle with them except trying not to hit the lights anywhere because they tend to break if hit because of the way they are exposed. I have used them 2 seasons so far.


Reply
Page 2 / 2
Share: